F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 2T Choke issues Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
fade-e Forums Junkie Location: Sydney Registered: June 2004	Re: 2T Choke issues Wed, 14 July 2004 18:51 Quote: Hey guys im rehashing this thread on a similar quetsion. (Was ; where does choke hook upto?) one side on exhaust manifold, other where i told you previously Quote: When i cold start the car the fast idle cam wont engage? also backfires out the carby under load until warmed up to operating temp (80 degrees) is this normal? that means internal of choke is not adjusted correctly, backfiring is timing slightly off (check advance is set correctly! how did you check timing??? VERY IMPORTANT!!! 80deg is correct Quote: What is the likely cause of this? I got it on once last night out of about 15 attempts? timing mate, TIMING... also WITHOUT TRYING TO START THE CAR take off air filter and press accelerator to see if fuel being fed, air intake valve turns Quote: Other query is with the temperature coil spring in the choke housing. The spring end forms a hook kinda like a U shape. Now does the lever from the choke plate in the primary sit in the U or does the base of the U push the lever? ill look at my choke and see what i can disipher and get back to you on this, cause i dont use the choke on my engine EVENTHOUGH i should Quote: Also where can i get the exhaust manifold to choke hose? Or what type of hosing can i use.... cause i assume rubber would just melt. you can use brake line piping but would need to be made, try a wrecker but still its worth a try I FEEL LIKE A GRANDPA TEACHING HIS GRANDKID WHAT TO DO, NO OFFENCE TO YOU WHATSOEVER BUT IV JUST REALISED WHILE ANSWERING YOUR Qs THAT I HAVE BEEN WORKING IN THESE MOTORS FOR 7YRS NOW WHOW but now im the kid when it comes to the 3tgte but i hope to change that [Updated on: Wed, 14 July 2004 18:53] [Report message to a moderator]

	Subject	Poster	Date
	2T Choke issues	TA-022	Wed, 16 June 2004 13:20
	Re: 2T Where does the choke hook up to?	alex_ta22	Thu, 17 June 2004 07:10
	Re: 2T Where does the choke hook up to?	fade-e	Thu, 17 June 2004 07:19
	Re: 2T Where does the choke hook up to?	TA-022	Thu, 17 June 2004 09:37
	Re: 2T Choke issues	TA-022	Wed, 14 July 2004 11:35
	Re: 2T Choke issues	fade-e	Wed, 14 July 2004 18:30
	Re: 2T Choke issues	fade-e	Wed, 14 July 2004 18:51
	Re: 2T Choke issues	TA-022	Thu, 15 July 2004 11:23
	Re: 2T Choke issues	fade-e	Thu, 15 July 2004 13:36
	Re: 2T Choke issues	Classique71	Fri, 16 July 2004 02:24
	Re: 2T Choke issues	fade-e	Fri, 16 July 2004 02:33
	Re: 2T Choke issues	Classique71	Fri, 16 July 2004 02:47
	Re: 2T Choke issues	greenta22	Sun, 18 July 2004 11:45
	Re: 2T Choke issues	Classique71	Mon, 19 July 2004 02:42

Previous Topic:	1UZ-FE Wiring Diagrams
Next Topic:	Heat Shielding......

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.