Toymods Car Club
www.toymods.org.au
F.A.Q. F.A.Q.    Register Register    Login Login    Home Home
Members Members    Search Search
Classifieds » Miscellaneous » 6 Speed Gearbox [SYD/NSW]

Show: Today's Posts  :: Show Polls 
Email to friend 
Return to the default flat view Create a new topic Submit Reply
AuthorTopic
ddeane
Regular


Location:
PNG
Registered:
June 2002
Re: 6 Speed Gearbox [SYD/NSW] Wed, 14 July 2004 23:22 Go to previous messageGo to previous message
Gidday all

This gearbox has an integral bell housing so if you want it to fit anything but a 1gfe, 1ggteu, 1ggzeu or 2t/3t you are going to have to modify the 'bell housing', cut and weld etc.

I am in the process of fitting one into my 23 behind a 1ggteu. Overall the setup is the same length as a w58 so there is no need to change the tailshaft. The gear lever does come out a lot further back - the hole needs to be adjacent to the box section in front of the seats. The top of the shifter assembly intrudes further into the cabin so the hole is longer - but not a problem. The 'bell housing' extends a bit further back behind the starter bulge so it runs a bit close to the tunnel - only 5mm or so clearance - so there is a need to massage that a little. Everything else seems to be ok.

As to being the same as the box in a s15 200sx, my intelligence is that this is the case, just different ratios. I also understand that they are not as strong as the s14 5 speed box, but have heard of them in large hp s15s. S'pose if you want to drag race and/or flat change you should be looking for another g'box - although really that type of behaviour will break anything eventually. I am building this all with the expectation that the box will be handling 220rwKW

Craig

  Send a private message to this user    

SubjectPosterDate
Read Message   6 Speed Gearbox [SYD/NSW] ToranaJuddMon, 12 July 2004 05:58
Read Message   Re: 6 Speed Gearbox [SYD/NSW] ToranaJuddTue, 13 July 2004 10:27
Read Message   Re: 6 Speed Gearbox [SYD/NSW] ._T_.Tue, 13 July 2004 22:37
Read Message   Re: 6 Speed Gearbox [SYD/NSW] TrisTue, 13 July 2004 23:29
Read Message   Re: 6 Speed Gearbox [SYD/NSW] rb20detWed, 14 July 2004 07:14
Read Message   Re: 6 Speed Gearbox [SYD/NSW] CEL_3SGTEWed, 14 July 2004 07:54
Read Message   Re: 6 Speed Gearbox [SYD/NSW] domasikWed, 14 July 2004 10:22
Read Message   Re: 6 Speed Gearbox [SYD/NSW] KOFFEE-BLACKWed, 14 July 2004 13:27
Read Message   Re: 6 Speed Gearbox [SYD/NSW] AssailantWed, 14 July 2004 14:19
Read Message   Re: 6 Speed Gearbox [SYD/NSW] KOFFEE-BLACKThu, 15 July 2004 00:03
Read Message   Re: 6 Speed Gearbox [SYD/NSW]  ddeaneWed, 14 July 2004 23:22
Read Message   Re: 6 Speed Gearbox [SYD/NSW] AssailantThu, 15 July 2004 13:21
Read Message   Re: 6 Speed Gearbox [SYD/NSW] AE92poitThu, 15 July 2004 05:12
Read Message   Re: 6 Speed Gearbox [SYD/NSW] BugmanFri, 16 July 2004 00:07
Read Message   Re: 6 Speed Gearbox [SYD/NSW] ToranaJuddFri, 16 July 2004 06:12
Read Message   Re: 6 Speed Gearbox [SYD/NSW] BugmanFri, 16 July 2004 06:21
Read Message   Re: 6 Speed Gearbox [SYD/NSW] ToranaJuddFri, 16 July 2004 06:35
Read Message   Re: 6 Speed Gearbox [SYD/NSW] ToranaJuddSat, 17 July 2004 08:21
Read Message   Re: 6 Speed Gearbox [SYD/NSW] AssailantSat, 17 July 2004 12:46
Read Message   Re: 6 Speed Gearbox [SYD/NSW] ToranaJuddSat, 24 July 2004 09:25
Previous Topic:AE86 Quaife quick steering rack and pinion
Next Topic:TA22

Goto Forum:
-=] Back to Top [=-

Current Time: Sun Sep 7 03:11:30 UTC 2025

Total time taken to generate the page: 0.0037899017333984 seconds

Bandwidth utilization bar

.:: Contact :: Home ::.

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.