F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 2T Choke issues Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
fade-e Forums Junkie Location: Sydney Registered: June 2004	Re: 2T Choke issues Thu, 15 July 2004 13:36 OK if that is the case then you may have to readjust the timing once you have fixed the advance... when adjusting the timing technically you should remove thevacuum hose and block both sides, on the advance turner it has three lines (advance, retard and centre being stock)... set it to stock, have car running at 80deg (running temp, thats what i meant by it) and then adjust to 10deg BTDC. once that is done adjust idle to 600rpm and check timing again (but it shouldnt change, its only a just in case thing)... after that return vacuum hose from carby to advance, now it shouldnt really change the timing but it might. if this happens then with the advance turner set it back to 10deg BTDC (if anything it would be a couple turns, but most likely no turns) after that all you can do is turn off car, wait for it to cool properly andstart car and see if continues to backfire... hopefully it wont and all is good... then what you do is take car for a drive and see how it is... NOW THIS IS A WHAT I DO THING AND NOT BIBLE! but if all is good then give it a flat chat and see how she picks up. if yopur happy then all is good but if you feel its not good when its floored then you have to do the timing all over again but instead of haveing the advance turner at stock have it all the way out to the line. set it and then do the floor thing again and see if there is any difference. also with the flat chat that is another story we can get into if you like. its basically about how to adjust the pedal for correct positioning but if you have never touched it in your life then there shouldnt be any worry to get into this. on the other hand if you want to know then just ask!!! CHEERS... finally this thread is getting a bit off subject so in future just PM me and keep this stuff off the threads... easier for both us and im sure everyone else would appreciate the 1 less thread [Report message to a moderator]

	Subject	Poster	Date
	2T Choke issues	TA-022	Wed, 16 June 2004 13:20
	Re: 2T Where does the choke hook up to?	alex_ta22	Thu, 17 June 2004 07:10
	Re: 2T Where does the choke hook up to?	fade-e	Thu, 17 June 2004 07:19
	Re: 2T Where does the choke hook up to?	TA-022	Thu, 17 June 2004 09:37
	Re: 2T Choke issues	TA-022	Wed, 14 July 2004 11:35
	Re: 2T Choke issues	fade-e	Wed, 14 July 2004 18:30
	Re: 2T Choke issues	fade-e	Wed, 14 July 2004 18:51
	Re: 2T Choke issues	TA-022	Thu, 15 July 2004 11:23
	Re: 2T Choke issues	fade-e	Thu, 15 July 2004 13:36
	Re: 2T Choke issues	Classique71	Fri, 16 July 2004 02:24
	Re: 2T Choke issues	fade-e	Fri, 16 July 2004 02:33
	Re: 2T Choke issues	Classique71	Fri, 16 July 2004 02:47
	Re: 2T Choke issues	greenta22	Sun, 18 July 2004 11:45
	Re: 2T Choke issues	Classique71	Mon, 19 July 2004 02:42

Previous Topic:	1UZ-FE Wiring Diagrams
Next Topic:	Heat Shielding......

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.