| Author | Topic |
|---|
Location:
Sydney
Registered:
June 2004
|
|
Re: TA22 control arm question
|
Sat, 17 July 2004 09:35
 
|
 |
| SeptemberSquallIndustries wrote on Sat, 17 July 2004 18:58 |
fade-e, if you don't mind, could you say exactly what parts you changed and how much these parts each cost?
|
man i couldnt say cost of each part cause firstly i got them at trade prices and secondly this was 12monthas ago and i donty have reciepts to look at.
i do remember that the tie rods were roughly $15each x4, idler arm was like $30. as for bushes well prices i cannot give at all i really cant remember SORRY guys, but what i replaced is suspension wise is this:-
- upanhard rod bushes (chassis and diff)
- lower diff rods (both of them, chassis and diff)
- upper diff rods (both of them, chassis and diff)
- rear shocks (monroe gas)
done to both sides of front
- lower control arm bush (the one we are talking bout now)
- ball joint
- front shock (monroe gas)
- sway bar bush (control arm ones and chassis/engine bay ones)
- also i have added another stabiliser to the sway bar and changed those bushes too (this stabiliser is not stock or aftermarket but something i thought up and put on. IT REALLY HELPS TO KEEP CAR ON GROUND BELIEVE ME, goes to show my rally driving love   , man i LOVE the TAs HAAAAAAAAAAAARD)
DIDNT DO SPRINGS AT ALL, neither fron or back BUT i wish i did cause i have a hard ride now but better than before when i had a boat ride
now the $300 odd dollars is just for bushes... all up to do all suspension complete (except springs) and complete steering (except for reco of steering box) cost me bout $1100... this is heaps cheap i recon cause i got a quote for over $2000 but like i said i got all the parts at trade prices if not cheaper... hell one place quoted me $2700 to do it all 
[Updated on: Sat, 17 July 2004 09:50]
|
|
|
| | Subject | Poster | Date |
|---|
 |
TA22 control arm question
|
Cool1 | Sat, 17 July 2004 08:16 |
|
Re: TA22 control arm question
|
SeptemberSquallIndustries | Sat, 17 July 2004 08:23 |
|
Re: TA22 control arm question
|
fade-e | Sat, 17 July 2004 08:35 |
|
Re: TA22 control arm question
|
Cool1 | Sat, 17 July 2004 08:42 |
|
Re: TA22 control arm question
|
SeptemberSquallIndustries | Sat, 17 July 2004 08:55 |
|
Re: TA22 control arm question
|
SeptemberSquallIndustries | Sat, 17 July 2004 08:58 |
|
Re: TA22 control arm question
|
fade-e | Sat, 17 July 2004 09:35 |
|
Re: TA22 control arm question
|
SeptemberSquallIndustries | Sat, 17 July 2004 09:39 |
|
Re: TA22 control arm question
|
Steve_Reynolds | Mon, 19 July 2004 01:07 |
|
Re: TA22 control arm question
|
Kingswood | Mon, 19 July 2004 01:30 |
|
Re: TA22 control arm question
|
SeptemberSquallIndustries | Mon, 19 July 2004 03:42 |
|
Re: TA22 control arm question
|
toolman | Mon, 19 July 2004 04:20 |
|
Re: TA22 control arm question
|
Cool1 | Mon, 19 July 2004 08:07 |
|
Re: TA22 control arm question
|
fade-e | Sat, 17 July 2004 08:55 |
|
Re: TA22 control arm question
|
fade-e | Sat, 17 July 2004 10:05 |
|
Re: TA22 control arm question
|
fade-e | Mon, 19 July 2004 04:36 |
