F.A.Q.    Register    Login    Home Members    Search

Classifieds » Miscellaneous » ST185 Group A Front Cut bits (JDM) Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
dynomatt Regular Location: Brisbane Registered: May 2004	ST185 Group A Front Cut bits (JDM) Sun, 18 July 2004 02:32 I've got a Group A (JDM RC spec) front cut from which I've taken all the bits necessary to convert to Group A (W-A intercooler, radiator, hoses, bonnet, guards, bumper and supports etc...). The importer started it up for me before I pulled it apart. Ran perfectly, no smoke, no noises. Oil was clean, good coolant in all the right places. Cut has 143k on it. I'm keen to keep suspension parts, driveshafts, uprights, crossmembers, etc for spares for the rally car. I'm also keeping the turbo. Everything else is left over including engine (obviously less turbo and intercooler), gearbox, standard electricals, dash (although it's pretty crappy) etc. [Edit...prices added] Prices as per the following: Group A engine package including full loom, sensors, AFM, Group A ECU etc missing intercooler and turbo OFFERS? E151F Group A gearbox including factory oil cooler and lines - SOLD Front discs and calipers - SOLD Rear discs and calipers - SOLD Headlights including actuators (missing trim pieces) - $50 each Air to air intercooler standard GT4 - $100 ABS and front brake lines (and ecu if they exist?) - $50 Turbo timer - $20 Pedal box and clutch cylinders (for manual conversion) - $100 Dash remnants including climate control panel - SOLD (and a bargain was had there me thinks) I will have the cut stripped and the parts cleaned in the next few days. I'm in Canberra Attachment: Cut small.jpg (Size: 41.56KB, Downloaded 802 time(s)) Attachment: Cut 2 small.jpg (Size: 42.68KB, Downloaded 783 time(s)) [Updated on: Thu, 05 August 2004 02:18] [Report message to a moderator]

	Subject	Poster	Date
	ST185 Group A Front Cut bits (JDM)	dynomatt	Sun, 18 July 2004 02:32
	Re: ST185 Group A Front Cut bits (JDM)	Classique71	Sun, 18 July 2004 04:44
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Sun, 18 July 2004 05:37
	Re: ST185 Group A Front Cut bits (JDM)	juniorjack	Sun, 18 July 2004 09:16
	Re: ST185 Group A Front Cut bits (JDM)	chrisss	Sun, 18 July 2004 09:38
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Sun, 18 July 2004 10:30
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Sun, 18 July 2004 10:33
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Sun, 18 July 2004 22:28
	Re: ST185 Group A Front Cut bits (JDM)	davedave	Sun, 18 July 2004 23:19
	Re: ST185 Group A Front Cut bits (JDM)	spectral	Mon, 19 July 2004 00:37
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Mon, 19 July 2004 00:55
	Re: ST185 Group A Front Cut bits (JDM)	spectral	Mon, 19 July 2004 00:59
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Mon, 19 July 2004 01:04
	Re: ST185 Group A Front Cut bits (JDM)	-==L=a=N=c=E==-	Mon, 19 July 2004 12:33
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Mon, 19 July 2004 23:35
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Tue, 20 July 2004 22:25
	Re: ST185 Group A Front Cut bits (JDM)	davedave	Tue, 20 July 2004 22:56
	Re: ST185 Group A Front Cut bits (JDM)	Classique71	Wed, 21 July 2004 02:24
	Re: ST185 Group A Front Cut bits (JDM)	benmeyer	Wed, 21 July 2004 03:11
	Re: ST185 Group A Front Cut bits (JDM)	juniorjack	Wed, 21 July 2004 04:23
	Re: ST185 Group A Front Cut bits (JDM)	tortfeaser	Fri, 23 July 2004 00:33
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Fri, 23 July 2004 00:44
	Re: ST185 Group A Front Cut bits (JDM)	Toobs	Fri, 23 July 2004 04:21
	Re: ST185 Group A Front Cut bits (JDM)	turbocaldina	Sun, 25 July 2004 03:08
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Sun, 25 July 2004 10:14
	Re: ST185 Group A Front Cut bits (JDM)	turbocaldina	Sun, 25 July 2004 11:14
	Re: ST185 Group A Front Cut bits (JDM)	bubs	Sun, 25 July 2004 21:58
	Re: ST185 Group A Front Cut bits (JDM)	bubs	Sun, 25 July 2004 06:26
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Sun, 25 July 2004 22:42
	Re: ST185 Group A Front Cut bits (JDM)	bubs	Sun, 25 July 2004 22:49
	Re: ST185 Group A Front Cut bits (JDM)	turbocaldina	Thu, 29 July 2004 09:18
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Thu, 29 July 2004 11:28
	Re: ST185 Group A Front Cut bits (JDM)	davedave	Thu, 29 July 2004 12:12
	Re: ST185 Group A Front Cut bits (JDM)	benmeyer	Fri, 30 July 2004 02:46
	Re: ST185 Group A Front Cut bits (JDM)	benmeyer	Fri, 30 July 2004 06:31
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Sat, 31 July 2004 20:48
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Sun, 01 August 2004 05:31
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Mon, 02 August 2004 01:18
	Re: ST185 Group A Front Cut bits (JDM)	ra23celica	Mon, 02 August 2004 04:22
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Thu, 05 August 2004 02:21
	Re: ST185 Group A Front Cut bits (JDM)	wagonist	Fri, 06 August 2004 07:00
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Sun, 08 August 2004 22:13
	Re: ST185 Group A Front Cut bits (JDM)	dynomatt	Tue, 17 August 2004 03:37

Previous Topic:	2JZGTE Wiring loom and Ignitor
Next Topic:	Focal V130 5 1/4 inch splits

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.