F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 4age rebuild Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
HighRolla Forums Junkie Location: Sydney Registered: January 2004	Re: 4age rebuild Tue, 20 July 2004 22:32 TheSX - I've posted here about this prob - with pics (do a search). Go down to a bearing/seal shop. I got mine from CBC bearings and get a seal as allencr is saying but I could only get 7mm thick. 20mm OD x 10mm ID x 7mm thick. ($5.50 if I remember correctly) THe 7mm thick works better anyway as it has 1mm either side that doesn't sit in the groove on the shaft made by the old seal. (mine had a slight groove, yours may not) I am talking about the inner seal. There is an outer o-ring (I replaced this twice but then found the problem to be th inner seal). To get to the inner seal you need to take off the cog (not the rotor arm) this involves drilling out the pin etc etc. One from the wreckers will probably be the same as yours and they'll want over 100 for it I'd say. Ben [Report message to a moderator]

	Subject	Poster	Date
	4age rebuild	TheSX	Wed, 14 July 2004 10:26
	Re: 4age rebuild	sik sx	Wed, 14 July 2004 11:38
	Re: 4age rebuild	TheSX	Thu, 15 July 2004 10:29
	Re: 4age rebuild	SPRINTAH!	Thu, 15 July 2004 11:08
	Re: 4age rebuild	TheSX	Tue, 20 July 2004 11:11
	Re: 4age rebuild	wiso	Tue, 20 July 2004 14:50
	Re: 4age rebuild	allencr	Tue, 20 July 2004 15:00
	Re: 4age rebuild	HighRolla	Tue, 20 July 2004 22:32
	Re: 4age rebuild	RWDboy	Wed, 21 July 2004 00:43
	Re: 4age rebuild	TheSX	Wed, 21 July 2004 01:17
	Re: 4age rebuild	wiso	Wed, 21 July 2004 15:10
	Re: 4age rebuild	TheSX	Wed, 21 July 2004 21:35
	Re: 4age rebuild	tightarse	Thu, 22 July 2004 21:01
	Re: 4age rebuild	ranshz	Fri, 23 July 2004 10:51
	Re: 4age rebuild	DR1FTIN	Fri, 23 July 2004 12:04
	Re: 4age rebuild	HighRolla	Fri, 23 July 2004 14:33
	Re: 4age rebuild	HighRolla	Fri, 23 July 2004 14:35
	Re: 4age rebuild	TheSX	Mon, 26 July 2004 04:55
	Re: 4age rebuild	HighRolla	Mon, 26 July 2004 06:11
	Re: 4age rebuild	TheSX	Thu, 29 July 2004 04:00
	Re: 4age rebuild	RobST162	Thu, 29 July 2004 04:05
	Re: 4age rebuild	RobST162	Thu, 29 July 2004 04:33
	Re: 4age rebuild	TheSX	Thu, 29 July 2004 04:46
	Re: 4age rebuild	RobST162	Thu, 29 July 2004 04:48
	Re: 4age rebuild	thevelvetgreasemonkey	Thu, 29 July 2004 07:07
	Re: 4age rebuild	RobST162	Thu, 29 July 2004 07:11
	Re: 4age rebuild	HighRolla	Thu, 29 July 2004 07:30
	Re: 4age rebuild	RobST162	Thu, 19 August 2004 06:28
	Re: 4age rebuild	TheSX	Fri, 03 September 2004 23:36
	Re: 4age rebuild	wiso	Mon, 06 September 2004 14:24
	Re: 4age rebuild	TheSX	Tue, 07 September 2004 10:58
	Re: 4age rebuild	mrshin	Tue, 07 September 2004 23:03

Previous Topic:	tail shaft pieces
Next Topic:	ems stinger 3 what r they like

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.