F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » any easy way to get the flywheel off Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
7M-Brisbane Forums Junkie Location: Brisbane Registered: November 2002	Re: any easy way to get the flywheel off Wed, 21 July 2004 12:20 Leverage is your friend. The other option is a cheap rattle gun. Once you use one of these babies, you'll never go back A sudden shock is better than straining as hard as you can. And yes you have the right idea locking the crank pulled bolt, but also Blake has the right idea, if you can jam the flywheel with a screwdriver this may be another option. I have always found that the best way is to put a torque wrench on the crank pulled bolt, then a bar on that, and position it such that it is forcing against the side of your engine bay (with a rag protecting it). That means your mate doesn't need to hold it... and can probably get under your car and help push/pull on the other side of the bar you are using. Always make sure your car is supported very well when putting lots of force into undoing things, as you will be pissed off when you're dead. [Report message to a moderator]

	Subject	Poster	Date
	any easy way to get the flywheel off	jackel	Wed, 21 July 2004 11:40
	Re: any easy way to get the flywheel off	V8_MA61	Wed, 21 July 2004 11:41
	Re: any easy way to get the flywheel off	jackel	Wed, 21 July 2004 11:47
	Re: any easy way to get the flywheel off	V8_MA61	Wed, 21 July 2004 11:54
	Re: any easy way to get the flywheel off	jackel	Wed, 21 July 2004 12:03
	Re: any easy way to get the flywheel off	7M-Brisbane	Wed, 21 July 2004 12:20
	Re: any easy way to get the flywheel off	Cool1	Wed, 21 July 2004 12:41
	Re: any easy way to get the flywheel off	jackel	Wed, 21 July 2004 12:55
	Re: any easy way to get the flywheel off	gianttomato	Wed, 21 July 2004 18:19
	Re: any easy way to get the flywheel off	justcallmefrank	Fri, 23 July 2004 00:57
	Re: any easy way to get the flywheel off	fade-e	Wed, 21 July 2004 17:27
	Re: any easy way to get the flywheel off	Henn	Wed, 21 July 2004 17:35
	Re: any easy way to get the flywheel off	crazedrt104	Wed, 21 July 2004 22:51
	Re: any easy way to get the flywheel off	Ben Wilson	Wed, 21 July 2004 23:23
	Re: any easy way to get the flywheel off	Super Jamie	Wed, 21 July 2004 23:51
	Re: any easy way to get the flywheel off	Super Jamie	Thu, 22 July 2004 00:08
	Re: any easy way to get the flywheel off	CLG	Thu, 22 July 2004 09:06
	Re: any easy way to get the flywheel off	V8_MA61	Thu, 22 July 2004 09:56
	Re: any easy way to get the flywheel off	Cool1	Thu, 22 July 2004 10:11
	Re: any easy way to get the flywheel off	ed_ma61	Thu, 22 July 2004 11:31
	Re: any easy way to get the flywheel off	V8_MA61	Thu, 22 July 2004 11:29

Previous Topic:	where to mount celicamad controller
Next Topic:	6MGE inherant problems??

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.