| Author | Topic |
|---|
I supported Toymods
Location:
Berowra-Sydney
Registered:
July 2002
|
|
Re: Panel Beating ( RUST)
|
Sun, 22 September 2002 07:27
 
|
 |
ok my Celica i cut all the rust out myself and it was the first car i ever did and rust has started to come back through 3 years later, reason i put it down to is when i cut it out i just sprayed the area with prima to seal it off from the air but now found out prima is porus 
i say do it yourself if you feel your up to it, and if you are able to sit down and put hours of work into it,
tips i give when cutting the rust out and that is get it all out as much as you can then straight away treat that bit of metal with some form of rust prevention, then bog it and sand, spray with prima then coat it in any old enemal just to make sure its all sealed off from air before you re spray the car,
if its a panel and its hard to get to the back of it get some fish oil and spray that through the rust hole and anyway you can.
i got 3 years after not doing it the right way, going to do it again at the end of the year the RIGHT WAY and should get even more then 3 years out of it. 
also i feel much better knowing i put all the hard work into my car instead of someone else
|
|
|
| | Subject | Poster | Date |
|---|
 |
Panel Beating ( RUST)
|
moukey_lal | Sat, 21 September 2002 05:11 |
|
Re: Panel Beating ( RUST)
|
SPEEDCORE | Sun, 22 September 2002 05:48 |
|
Re: Panel Beating ( RUST)
|
justcallmefrank | Sun, 22 September 2002 06:43 |
|
Re: Panel Beating ( RUST)
|
GIN51E | Sun, 22 September 2002 07:27 |
|
Re: Panel Beating ( RUST)
|
Rolla Boy | Sun, 22 September 2002 08:33 |
|
Re: Panel Beating ( RUST)
|
justcallmefrank | Sun, 22 September 2002 11:00 |
|
Re: Panel Beating ( RUST)
|
Cool1 | Sun, 22 September 2002 12:25 |
|
Re: Panel Beating ( RUST)
|
celicamad85 | Sun, 22 September 2002 12:26 |
|
Re: Panel Beating ( RUST)
|
manipulate | Sun, 22 September 2002 12:36 |
|
Re: Panel Beating ( RUST)
|
moukey_lal | Mon, 23 September 2002 00:48 |
|
Re: Panel Beating ( RUST)
|
RA23 Dan | Mon, 23 September 2002 04:14 |
|
Re: Panel Beating ( RUST)
|
moukey_lal | Mon, 23 September 2002 06:22 |
|
Re: Panel Beating ( RUST)
|
justinharwoodran | Mon, 23 September 2002 06:22 |
|
Re: Panel Beating ( RUST)
|
justcallmefrank | Mon, 23 September 2002 06:50 |
|
Re: Panel Beating ( RUST)
|
draven | Mon, 23 September 2002 09:05 |
|
Re: Panel Beating ( RUST)
|
GIN51E | Mon, 23 September 2002 09:19 |
|
Re: Panel Beating ( RUST)
|
Gased | Mon, 23 September 2002 13:46 |
