| Author | Topic |
|---|
Location:
Sydney Area
Registered:
September 2002
|
|
Re: Panel Beating ( RUST)
|
Mon, 23 September 2002 00:48
 
|
 |
THere are plenty of rust converters out there. When i got the rust out of my car, i used a self priming rust converter. Its good for 30 days after you apply the converter. But for best results, only around 3 hrs the pachage sais.
ALso i have a Question about sanding and painting. When i painted my 77 model, i used a red colour. I painted the paint on, no problems there, then i used 2 pac clear on it, and before i put that on, i had to sand the paint back to a smooth surface with some really fine wet and dry. Doing this wasnt that much of a problem. I got the paint back as smooth as a babies bum, and then cleaned all the particles off the car, and then i applied the 2 pac clear. And in some spots of the car, the clear decided to go all CRAP. like there was some oil on the car or something. I then has to lightly sand the 2 pac clear back, and then i painted it again, and it still buggered up. Any ideas???
|
|
|
| | Subject | Poster | Date |
|---|
 |
Panel Beating ( RUST)
|
moukey_lal | Sat, 21 September 2002 05:11 |
|
Re: Panel Beating ( RUST)
|
SPEEDCORE | Sun, 22 September 2002 05:48 |
|
Re: Panel Beating ( RUST)
|
justcallmefrank | Sun, 22 September 2002 06:43 |
|
Re: Panel Beating ( RUST)
|
GIN51E | Sun, 22 September 2002 07:27 |
|
Re: Panel Beating ( RUST)
|
Rolla Boy | Sun, 22 September 2002 08:33 |
|
Re: Panel Beating ( RUST)
|
justcallmefrank | Sun, 22 September 2002 11:00 |
|
Re: Panel Beating ( RUST)
|
Cool1 | Sun, 22 September 2002 12:25 |
|
Re: Panel Beating ( RUST)
|
celicamad85 | Sun, 22 September 2002 12:26 |
|
Re: Panel Beating ( RUST)
|
manipulate | Sun, 22 September 2002 12:36 |
|
Re: Panel Beating ( RUST)
|
moukey_lal | Mon, 23 September 2002 00:48 |
|
Re: Panel Beating ( RUST)
|
RA23 Dan | Mon, 23 September 2002 04:14 |
|
Re: Panel Beating ( RUST)
|
moukey_lal | Mon, 23 September 2002 06:22 |
|
Re: Panel Beating ( RUST)
|
justinharwoodran | Mon, 23 September 2002 06:22 |
|
Re: Panel Beating ( RUST)
|
justcallmefrank | Mon, 23 September 2002 06:50 |
|
Re: Panel Beating ( RUST)
|
draven | Mon, 23 September 2002 09:05 |
|
Re: Panel Beating ( RUST)
|
GIN51E | Mon, 23 September 2002 09:19 |
|
Re: Panel Beating ( RUST)
|
Gased | Mon, 23 September 2002 13:46 |
