| Author | Topic |
|---|
Location:
Brisbane
Registered:
February 2003
|
|
Re: Getting injectors hi-flowed
|
Sat, 24 July 2004 11:25
 
|
 |
| justcallmefrank wrote on Sat, 24 July 2004 21:06 |
Well, I'll still contest statement one, because 6BOOST from PF was charging a turnaround service to modify factory injectors for more flow.
|
noyt withstanding 6Boost's technical skill, i'd be conerned about tinkering with all the good work mr bosch/denso et al put into designing injectors - it's minimal tolerance stuff - and usually designed with certain operating criteria in mind.
plus, changing the flow characteristics to get higher flow at high duty cycles may not produce the same increase in flow at low (shorter) duty cycles ... e.g. if your mods only work when the solenoid is fully open - but during a short duty cycle, the solenoid spends minimal time at fully open and significant time in an 'opening' state.
i can't see how you can get significant increases in flow rates without replacing the solnoid, pintle and valve seat... in which case it would be easier and possibly cheaper to get new bosch/denso/sard/... motorsport items from somebody like EFI technologies.
why not just buy larger injectors and spend a few bucks geting them cleaned?
|
|
|
| | Subject | Poster | Date |
|---|
 |
Getting injectors hi-flowed
|
Celica_John | Sat, 24 July 2004 06:09 |
|
Re: Getting injectors hi-flowed
|
boxh34d | Sat, 24 July 2004 06:59 |
|
Re: Getting injectors hi-flowed
|
ed_ma61 | Sat, 24 July 2004 07:33 |
|
Re: Getting injectors hi-flowed
|
justcallmefrank | Sat, 24 July 2004 10:07 |
|
Re: Getting injectors hi-flowed
|
ed_ma61 | Sat, 24 July 2004 10:39 |
|
Re: Getting injectors hi-flowed
|
justcallmefrank | Sat, 24 July 2004 10:41 |
|
Re: Getting injectors hi-flowed
|
ed_ma61 | Sat, 24 July 2004 11:00 |
|
Re: Getting injectors hi-flowed
|
V8_MA61 | Sat, 24 July 2004 10:45 |
|
Re: Getting injectors hi-flowed
|
justcallmefrank | Sat, 24 July 2004 10:53 |
|
Re: Getting injectors hi-flowed
|
ed_ma61 | Sat, 24 July 2004 10:58 |
|
Re: Getting injectors hi-flowed
|
justcallmefrank | Sat, 24 July 2004 11:06 |
|
Re: Getting injectors hi-flowed
|
thechuckster | Sat, 24 July 2004 11:25 |
|
Re: Getting injectors hi-flowed
|
justcallmefrank | Sat, 24 July 2004 11:55 |
|
Re: Getting injectors hi-flowed
|
thechuckster | Sat, 24 July 2004 12:00 |
|
Re: Getting injectors hi-flowed
|
ed_ma61 | Sat, 24 July 2004 12:03 |
|
Re: Getting injectors hi-flowed
|
boxh34d | Sat, 24 July 2004 13:04 |
|
Re: Getting injectors hi-flowed
|
boxh34d | Sun, 25 July 2004 07:51 |
|
Re: Getting injectors hi-flowed
|
ed_ma61 | Sat, 24 July 2004 11:10 |
|
Re: Getting injectors hi-flowed
|
justcallmefrank | Sat, 24 July 2004 11:15 |
|
Re: Getting injectors hi-flowed
|
ed_ma61 | Sat, 24 July 2004 11:27 |
|
Re: Getting injectors hi-flowed
|
ed_ma61 | Sat, 24 July 2004 11:30 |
|
Re: Getting injectors hi-flowed
|
justcallmefrank | Sat, 24 July 2004 11:36 |
|
Re: Getting injectors hi-flowed
|
fade-e | Sat, 24 July 2004 11:44 |
