| Author | Topic |
|---|
|
|
Re: Fuel pump & filter on MA70
|
Mon, 23 September 2002 01:29
 
|
 |
If your pump pickup assembly is the same as a jza70 then I know you can fit one of the larger bosch pumps.
The part numbers for these are quite long but the last 3 digits will identify them enough to purchase one.
I suggest prolly an 040 or 019, they are the largest dedicated intake pumps that bosch make, reputed to be good for up to 600 hp, garenteed to be good for 400 +. They will flow nearly 4L a min. at High pressure. $400 or so, shop around !
(keep in mind , most commercial fuel flow/pressure test units are off the scale at 3L/min.)
OR if you need more go the 044 for up to 700 hp, it flows over 4L a min. these are not intank pumps and nominally require a surge tank setup, but I know lots of guys who run them intank with a modified pickup ( easy to do). Bosch quoted me $650. but I have heard they can be had for much less.
Fitment is a 1/2 hour job in a skline, however you need to remove your tank to do the supra, count on at least an hours work.
Matt.
|
|
|
