Author | Topic |
Location: Brisbane
Registered: October 2002
|
carburettor experts wanted
|
Mon, 26 July 2004 08:45
|
|
i am having a new problem with my car, it is an 18RGU, dead stock, twin solex's.
if i try to accelerate slowly its fine, if u need to go a bit more, it stumbles, and if its anywhere in the revs and it does stumble and i fully flatten it {even at 1500rpm} it just gets a real low grumble {cause of the WOT} and it just takes off, no stumbling or anything.
but it wouldnt do that today, it'd still stumble, sometimes all the way to 5500rpm, then 100m down the road i'd try again and it'd be fine.
all weekend it was cool, {i did 450km+} but now its shit.
also, when its cold, it idles way too low, stalls easily, but when its warm, it idles really high {1500+} and it really shits me, what causes that.
also, which way do u turn the mixture screws to richen/lean the mixture.
and the accel pump rod, where is i best to have the split pin located, lowest spot or highest {what location on the rod makes it do what}
now, if u can understand my gibberish, i'd be grateful for a reply
Phil
|
|
|
| Subject | Poster | Date |
|
carburettor experts wanted
|
Mr DOHC | Mon, 26 July 2004 08:45 |
|
Re: carburettor experts wanted
|
people100 | Mon, 26 July 2004 08:59 |
|
Re: carburettor experts wanted
|
Dabbid | Mon, 26 July 2004 10:46 |
|
Re: carburettor experts wanted
|
Mr DOHC | Mon, 26 July 2004 11:30 |
|
Re: carburettor experts wanted
|
Dabbid | Mon, 26 July 2004 11:37 |
|
Re: carburettor experts wanted
|
Mr DOHC | Mon, 26 July 2004 11:42 |
|
Re: carburettor experts wanted
|
mrshin | Mon, 26 July 2004 13:29 |
|
Re: carburettor experts wanted
|
SIKTA22 | Mon, 26 July 2004 15:26 |
|
Re: carburettor experts wanted
|
joecoolmk2 | Mon, 26 July 2004 23:41 |
|
Re: carburettor experts wanted
|
Mr DOHC | Wed, 28 July 2004 08:42 |
|
Re: carburettor experts wanted
|
earlyrolla | Wed, 28 July 2004 13:03 |
|
Re: carburettor experts wanted
|
Mr DOHC | Fri, 30 July 2004 08:46 |
|
Re: carburettor experts wanted
|
TA-022 | Fri, 30 July 2004 09:12 |
|
Re: carburettor experts wanted
|
joecoolmk2 | Fri, 30 July 2004 12:43 |
|
Re: carburettor experts wanted
|
TA-022 | Mon, 02 August 2004 07:57 |
|
Re: carburettor experts wanted
|
joecoolmk2 | Mon, 02 August 2004 08:46 |
|
Re: carburettor experts wanted
|
TA-022 | Mon, 02 August 2004 09:15 |
|
Re: carburettor experts wanted
|
M.W.P. | Mon, 02 August 2004 09:20 |
|
Re: carburettor experts wanted
|
TA-022 | Mon, 02 August 2004 09:42 |
|
Re: carburettor experts wanted
|
joecoolmk2 | Mon, 02 August 2004 09:51 |