| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: mandrel bend or standard bend exhaust
|
Mon, 26 July 2004 14:03
 
|
 |
i would use mandrel bends if i needed a bend greater than about 45 degrees, or if i needed a tighter radius, to make shit fit, than press bending allowed.
the mandrel bends i used for my extractors had a radius of about 15-20cm, whereas the press bends were more like 30cm radius.
if a 180 degree press bend is about $10-15... what are you worried about. (unless you are making V8 headers  )
Cya, Stewart
|
|
|
| | Subject | Poster | Date |
|---|
 |
mandrel bend or standard bend exhaust
|
fade-e | Mon, 26 July 2004 06:42 |
|
Re: mandrel bend or standard bend exhaust
|
ae86slaver | Mon, 26 July 2004 06:56 |
|
Re: mandrel bend or standard bend exhaust
|
TurboRA28 | Mon, 26 July 2004 07:03 |
|
Re: mandrel bend or standard bend exhaust
|
TurboRA28 | Mon, 26 July 2004 07:05 |
|
Re: mandrel bend or standard bend exhaust
|
TA-022 | Mon, 26 July 2004 07:18 |
|
Re: mandrel bend or standard bend exhaust
|
Norbie | Mon, 26 July 2004 07:17 |
|
Re: mandrel bend or standard bend exhaust
|
ae86drift | Mon, 26 July 2004 07:54 |
|
Re: mandrel bend or standard bend exhaust
|
TurboRA28 | Mon, 26 July 2004 07:18 |
|
Re: mandrel bend or standard bend exhaust
|
fade-e | Mon, 26 July 2004 07:20 |
|
Re: mandrel bend or standard bend exhaust
|
TA-022 | Mon, 26 July 2004 07:58 |
|
Re: mandrel bend or standard bend exhaust
|
Chris Davey | Mon, 26 July 2004 08:05 |
|
Re: mandrel bend or standard bend exhaust
|
TA-022 | Mon, 26 July 2004 08:14 |
|
Re: mandrel bend or standard bend exhaust
|
AE86slut | Mon, 26 July 2004 08:19 |
|
Re: mandrel bend or standard bend exhaust
|
Norbie | Mon, 26 July 2004 12:32 |
|
Re: mandrel bend or standard bend exhaust
|
ae86drift | Mon, 26 July 2004 12:34 |
|
Re: mandrel bend or standard bend exhaust
|
Norbie | Mon, 26 July 2004 13:42 |
|
Re: mandrel bend or standard bend exhaust
|
oldcorollas | Mon, 26 July 2004 14:03 |
|
Re: mandrel bend or standard bend exhaust
|
ed_ma61 | Mon, 26 July 2004 14:08 |
|
Re: mandrel bend or standard bend exhaust
|
fade-e | Mon, 26 July 2004 15:52 |
|
Re: mandrel bend or standard bend exhaust
|
thomasbl | Tue, 27 July 2004 02:27 |
|
Re: mandrel bend or standard bend exhaust
|
TA-022 | Tue, 27 July 2004 06:37 |
|
Re: mandrel bend or standard bend exhaust
|
indian | Tue, 27 July 2004 07:03 |
|
Re: mandrel bend or standard bend exhaust
|
oldcorollas | Tue, 27 July 2004 08:00 |
|
Re: mandrel bend or standard bend exhaust
|
TA-022 | Tue, 27 July 2004 08:07 |
