| Author | Topic |
|---|
Toymods Board Member
I supported Toymods
Location:
Turramurra, Sydney.
Registered:
May 2002
|
|
Re: Positioning of O2 Sensor
|
Mon, 23 September 2002 09:02
 
|
 |
Hey sam, I'm dealing with that very problem. I had the flange welded on down on the 2-1 section, first by quickfit (ended up the flange fouled on the g'box crossmember, my fault, 'cos I took just the extractors in, no car) then by Liverpool exhaust, in the same spot but without fouling on anything.
Neither place advised me about the heat factor, so it obviously doesn't work (standard 4A-GE O2 sensor).
Someone suggested to me to have 2 sensors, and a switch to switch between the 2, but talking to michael/irally about it, he reckons it would prolly still be too far away. It would certainly be further away than standard. So unless you want individual sensors for each cylinder (which would be pretty cool!) you may be stuck, unless you can use a heated one that will work ok with the standard ECU.
Can anyone tell us if there's a Toyota O2 sensor, with the standard flange, that is a heated type? And will it work with the standard ECU?
And will it totally fix the problem, being still quite far from the ports?
Seeing as I have a microtech I can use pretty much any sensor, are some better than others?
|
|
|
| | Subject | Poster | Date |
|---|
 |
Positioning of O2 Sensor
|
Sam | Sun, 22 September 2002 21:11 |
|
Re: Positioning of O2 Sensor
|
E30-323ti | Sun, 22 September 2002 22:24 |
|
Re: Positioning of O2 Sensor
|
BigWorm | Mon, 23 September 2002 09:02 |
|
Re: Positioning of O2 Sensor
|
Sam | Mon, 23 September 2002 21:15 |
|
Re: Positioning of O2 Sensor
|
E30-323ti | Mon, 23 September 2002 20:40 |
|
Re: Positioning of O2 Sensor
|
Ben Wilson | Mon, 23 September 2002 22:24 |
|
Re: Positioning of O2 Sensor
|
E30-323ti | Tue, 24 September 2002 03:39 |
|
Re: Positioning of O2 Sensor
|
jazae86 | Tue, 24 September 2002 07:26 |
|
Re: Positioning of O2 Sensor
|
5KinKP60 | Tue, 24 September 2002 09:50 |
|
Re: Positioning of O2 Sensor
|
rob_RA40 | Tue, 24 September 2002 10:07 |
|
Re: Positioning of O2 Sensor
|
jazae86 | Tue, 24 September 2002 15:51 |
|
Re: Positioning of O2 Sensor
|
BigWorm | Wed, 25 September 2002 10:20 |
|
Re: Positioning of O2 Sensor
|
jazae86 | Wed, 25 September 2002 10:34 |
|
Re: Positioning of O2 Sensor
|
BigWorm | Wed, 25 September 2002 10:56 |
|
Re: Positioning of O2 Sensor
|
Sam | Thu, 26 September 2002 03:32 |
|
Re: Positioning of O2 Sensor
|
5KinKP60 | Thu, 26 September 2002 08:32 |
