F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 18rgeu wiring problem Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
matt_84 Forums Junkie Location: Ipswich Registered: October 2003	Re: 18rgeu wiring problem Sat, 31 July 2004 03:53 Can anyone else confirm that I have a problem if both terminals on the injector clip have 12v+ going to earth? To clarify, my wiring goes from a relay to a thick black/yellow wire to a resistor box then to the injectors. Now, the white/green and white/red should go to the ecu, where it is switched, and then earthed via brown wires on the manifold. I am getting a 12v+ reading from both terminals, so that means the ecu is feeding 12v+ through the white/green, white/red wires to the injectors? [Report message to a moderator]

	Subject	Poster	Date
	18rgeu wiring problem	matt_84	Fri, 30 July 2004 07:22
	Re: 18rgeu wiring problem	Lambolica	Fri, 30 July 2004 07:28
	Re: 18rgeu wiring problem	matt_84	Fri, 30 July 2004 07:36
	Re: 18rgeu wiring problem	Lambolica	Fri, 30 July 2004 07:39
	Re: 18rgeu wiring problem	matt_84	Fri, 30 July 2004 07:57
	Re: 18rgeu wiring problem	Lambolica	Fri, 30 July 2004 08:00
	Re: 18rgeu wiring problem	matt_84	Fri, 30 July 2004 08:06
	Re: 18rgeu wiring problem	Lambolica	Fri, 30 July 2004 08:11
	Re: 18rgeu wiring problem	matt_84	Fri, 30 July 2004 08:13
	Re: 18rgeu wiring problem	matt_84	Sat, 31 July 2004 03:53
	Re: 18rgeu wiring problem	sideshow	Sat, 31 July 2004 05:46
	Re: 18rgeu wiring problem	matt_84	Sat, 31 July 2004 06:13

Previous Topic:	4age conversion in Bris
Next Topic:	air filter adaptor pipe

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.