| Author | Topic |
|---|
Location:
Melbourne
Registered:
May 2002
|
|
Re: 7m Flywheel, Pressure plate, Clutch
|
Sun, 01 August 2004 02:29
 
|
 |
|
Yep that defnitly does look like a 7mge setup, measure the depth of your p plate, that should be about 50mm or therabouts. You could also mate this setup up to a 1g, however you would need to modify your thrust bearing carrier to be 10mm shorter beacuase the p plate is 10mm thicker. You will find that you can get a heavier p plate for this flywheel than what you can for a 1g flywheel.
|
|
|
| | Subject | Poster | Date |
|---|
 |
SOLD *7m Flywheel, Pressure plate, Clutch* SOLD
|
acmtt | Sat, 31 July 2004 12:45 |
|
Re: 7m Flywheel, Pressure plate, Clutch
|
cambelt | Sat, 31 July 2004 14:18 |
|
Re: 7m Flywheel, Pressure plate, Clutch
|
gianttomato | Sun, 01 August 2004 00:42 |
|
Re: 7m Flywheel, Pressure plate, Clutch
|
Fattony | Sun, 01 August 2004 02:29 |
|
Re: 7m Flywheel, Pressure plate, Clutch
|
acmtt | Sun, 01 August 2004 03:50 |
|
Re: 7m Flywheel, Pressure plate, Clutch
|
joecoolmk2 | Sun, 01 August 2004 09:01 |
|
Re: 7m Flywheel, Pressure plate, Clutch
|
acmtt | Sun, 01 August 2004 11:46 |
