| Author | Topic |
|---|
Location:
Gold Coast, QLD
Registered:
April 2004
|
|
Re: Unsettled 4th Gen owner!!!
|
Wed, 04 August 2004 06:07
 
|
 |
AFAIK, the main reason a bearing ends up spinning is lack of lubrication. Once there is none, the friction and heat build up causes the bearing to grab the crank (or the crank to grab the bearing, your choice  ) and that's that.
So I don't think there's any warning to it, I doubt it would take very long for this to happen once the lubrication isn't there.
Keep an eye on the oil system, don't rev the rings off it and you should be fine. Toyota engines are bulletproof, so if it's looked after I wouldn't be surprised to see it make 300000. Mines at 262000, so I'm not far behind you!
|
|
|
| | Subject | Poster | Date |
|---|
 |
Unsettled 4th Gen owner!!!
|
TRD-ST162 | Wed, 04 August 2004 00:20 |
|
Re: Unsettled 4th Gen owner!!!
|
RobST162 | Wed, 04 August 2004 03:39 |
|
Re: Unsettled 4th Gen owner!!!
|
TRD-ST162 | Wed, 04 August 2004 04:36 |
|
Re: Unsettled 4th Gen owner!!!
|
improvedae86 | Wed, 04 August 2004 05:42 |
|
Re: Unsettled 4th Gen owner!!!
|
Draza | Wed, 04 August 2004 05:55 |
|
Re: Unsettled 4th Gen owner!!!
|
matt86sx | Wed, 04 August 2004 06:07 |
|
Re: Unsettled 4th Gen owner!!!
|
wiso | Wed, 04 August 2004 14:06 |
|
Re: Unsettled 4th Gen owner!!!
|
TRD-ST162 | Thu, 05 August 2004 01:11 |
|
Re: Unsettled 4th Gen owner!!!
|
wiso | Thu, 05 August 2004 15:25 |
|
Re: Unsettled 4th Gen owner!!!
|
RWDboy | Thu, 05 August 2004 05:17 |
|
Re: Unsettled 4th Gen owner!!!
|
TRD-ST162 | Thu, 05 August 2004 23:44 |
|
Re: Unsettled 4th Gen owner!!!
|
RWDboy | Fri, 06 August 2004 00:18 |
