| Author | Topic |
|---|
Toymods Social Secretary
Location:
Sydney
Registered:
July 2002
|
|
Re: alarm installation help! (ae92)
|
Thu, 05 August 2004 01:23
 
|
 |
ok, with AE92's, EVERY wire that connects to the car's wiring can be found within 300mm of the driver's kick panel. Only the Siren and bonnet switch wires will need to be extended.
CENTRAL LOCKING: The dash swtich uses negative trigger. use a test light to probe the wires and find which is which. 99% of alarms have negative trigger outputs for C.D.L.
BOOT LIGHT: Is connected to the door switch wire - RED/White in drivers kick panel
INDICATORS: Connect one wire to each of the indicator wires. Using a test light you should find there are three indicator wires coming from teh steering column, each green with another colour (or totally green). One left, one right, one both. If you have two indicator output wires from teh alarm, connect one to each of the left and right wires.
|
|
|
