F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » SPRAY PAINTING PANELS part 2 Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
acmtt Regular Location: Melbourne Registered: March 2003	Re: SPRAY PAINTING PANELS Thu, 05 August 2004 08:21 Also if the surface temperature of the panel doesn't get above 13 deg it will not dry quickly. The spray tip size will dictate how much material passes through the gun, fine tuned by the knobs at the rear of the handpiece. They alter width of fan and air volume, some also offer control of paint volume. A thick coat will always take longer to dry. So many thin coats at the right surface temperature is the answer. It should still harden and cure without any problems, but don't apply any different coats on until it has. That is if you are applying a two pak clear coat over it, it may crackle under the top coat. Try thinning up to 150% thinners for faster drying, ( test patch) but the surface temperature is probably the more important thing here. [Report message to a moderator]

	Subject	Poster	Date
	SPRAY PAINTING PANELS part 2	Leighp	Thu, 05 August 2004 04:04
	Re: SPRAY PAINTING PANELS	cam_RA40	Thu, 05 August 2004 04:17
	Re: SPRAY PAINTING PANELS	justcallmefrank	Thu, 05 August 2004 04:43
	Re: SPRAY PAINTING PANELS	Leighp	Thu, 05 August 2004 05:15
	Re: SPRAY PAINTING PANELS	SeptemberSquallIndustries	Thu, 05 August 2004 05:47
	Re: SPRAY PAINTING PANELS	Leighp	Thu, 05 August 2004 05:52
	Re: SPRAY PAINTING PANELS	SeptemberSquallIndustries	Thu, 05 August 2004 06:20
	Re: SPRAY PAINTING PANELS	acmtt	Thu, 05 August 2004 08:21
	Re: SPRAY PAINTING PANELS	Mookie	Thu, 05 August 2004 09:17
	Re: SPRAY PAINTING PANELS	people100	Thu, 05 August 2004 11:01
	Re: SPRAY PAINTING PANELS	TA22 GT	Thu, 05 August 2004 12:29
	Re: SPRAY PAINTING PANELS	Leighp	Thu, 05 August 2004 23:35
	Re: SPRAY PAINTING PANELS	TA22 GT	Fri, 06 August 2004 11:12
	Re: SPRAY PAINTING PANELS	fade-e	Fri, 06 August 2004 11:25
	Re: SPRAY PAINTING PANELS	TA22 GT	Fri, 06 August 2004 12:54
	Re: SPRAY PAINTING PANELS	fade-e	Fri, 06 August 2004 13:29
	Re: SPRAY PAINTING PANELS	Leighp	Fri, 06 August 2004 14:56
	Re: SPRAY PAINTING PANELS	fade-e	Sat, 07 August 2004 04:50
	Re: SPRAY PAINTING PANELS	Leighp	Sun, 08 August 2004 23:46
	Re: SPRAY PAINTING PANELS part 2	justcallmefrank	Mon, 09 August 2004 00:51
	Re: SPRAY PAINTING PANELS part 2	fade-e	Mon, 09 August 2004 01:10
	Re: SPRAY PAINTING PANELS part 2	Leighp	Mon, 09 August 2004 01:34
	Re: SPRAY PAINTING PANELS part 2	Leighp	Mon, 09 August 2004 01:38
	Re: SPRAY PAINTING PANELS part 2	justcallmefrank	Mon, 09 August 2004 01:40
	Re: SPRAY PAINTING PANELS part 2	fade-e	Mon, 09 August 2004 01:48
	Re: SPRAY PAINTING PANELS part 2	Leighp	Mon, 09 August 2004 01:52
	Re: SPRAY PAINTING PANELS part 2	fade-e	Mon, 09 August 2004 02:14
	Re: SPRAY PAINTING PANELS part 2	TA-022	Mon, 09 August 2004 09:19
	Re: SPRAY PAINTING PANELS part 2	SeptemberSquallIndustries	Mon, 09 August 2004 10:38
	Re: SPRAY PAINTING PANELS part 2	fade-e	Mon, 09 August 2004 10:38
	Re: SPRAY PAINTING PANELS part 2	SeptemberSquallIndustries	Mon, 09 August 2004 10:45
	Re: SPRAY PAINTING PANELS part 2	fade-e	Mon, 09 August 2004 10:53
	Re: SPRAY PAINTING PANELS part 2	SeptemberSquallIndustries	Mon, 09 August 2004 11:01
	Re: SPRAY PAINTING PANELS part 2	TA-022	Mon, 09 August 2004 11:41
	Re: SPRAY PAINTING PANELS part 2	SeptemberSquallIndustries	Mon, 09 August 2004 12:37

Previous Topic:	R154 Gear Ratios 22R* Hilux vs MA70
Next Topic:	4age dizzy to 2tgeu

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.