| Author | Topic |
|---|
Location:
Switzerland
Registered:
September 2003
|
|
Re: aw11 gearboxs
|
Wed, 11 August 2004 01:24
 
|
 |
I have used a ae101 SC box in my mr2, I just used the shifter link from my old 4age mr2 box, The bit that the cables connect to.
On front wheel drives it stickes out the back, on the mr2 box it sticks out the front, I had to make a blanking plate for the old hole and drill a new one out the front of the box. I also from memory had to drill a new hole through the shaft for a roll pin, need to use a special drill as the shaft is hard!
I did this with out opening the box, just used a vacuum cleaner to suck the swarf away as I drilled very carfully, made a sleave for the drill so I could use the old hole (back hole) as a pilot.
Hope this helps in some way,
I also had to shorten the axles for the narrower aw11 shassis, but next time I would widden the track 
|
|
|
| | Subject | Poster | Date |
|---|
 |
aw11 gearboxs
|
Stinky | Mon, 09 August 2004 01:32 |
|
Re: aw11 gearboxs
|
feral4mr2 | Mon, 09 August 2004 02:58 |
|
Re: aw11 gearboxs
|
Stinky | Mon, 09 August 2004 03:46 |
|
Re: aw11 gearboxs
|
feral4mr2 | Mon, 09 August 2004 21:32 |
|
Re: aw11 gearboxs
|
Stinky | Tue, 10 August 2004 11:57 |
|
Re: aw11 gearboxs
|
feral4mr2 | Tue, 10 August 2004 15:04 |
|
Re: aw11 gearboxs
|
Ben Wilson | Tue, 10 August 2004 22:07 |
|
Re: aw11 gearboxs
|
feral4mr2 | Tue, 10 August 2004 22:47 |
|
Re: aw11 gearboxs
|
Ben Wilson | Tue, 10 August 2004 22:49 |
|
Re: aw11 gearboxs
|
TecEVO | Wed, 11 August 2004 00:39 |
|
Re: aw11 gearboxs
|
TecEVO | Wed, 11 August 2004 01:24 |
|
Re: aw11 gearboxs
|
TecEVO | Fri, 13 August 2004 01:29 |
|
Re: aw11 gearboxs
|
Stinky | Fri, 13 August 2004 10:33 |
|
Re: aw11 gearboxs
|
feral4mr2 | Wed, 11 August 2004 03:15 |
|
Re: aw11 gearboxs
|
Stinky | Wed, 11 August 2004 12:07 |
