| Author | Topic |
|---|
Location:
Adelaide
Registered:
January 2004
|
|
Re: AE86 Axles. very helpful!
|
Sat, 14 August 2004 00:31
|
 |
hopeful: luckily owners of AUS sprinters generally don't have to deal with kouki axles. generally only jap and US 86s had these two types of axles.
AE95 SR5 4x4 wagon axle:
okay, i got me a AE95 4wd rear axle. The spline is the same as the kouki axles (25mm, 23 spline), but everything else is different (too long, bearing too small, different axle seal plate, 4x100 PCD and not enough room to drill 4x114.3 PCD.
If the axle was cut down to the same size it would have about 1cm of spline left (not good) then u would have to find a bearing that fits and has the correct diamiter, then u have to find a way to fit 4x114.3 PCD holes in the plate.
My Conclusion:
Don't bother with converting this axle to fit a kouki diff and housing. Too much of a headache.
|
|
|
