| Author | Topic |
|---|
I supported Toymods
Location:
Perth, Western Australia
Registered:
December 2002
|
|
Re: TA22 auto to manual swap?
|
Sun, 15 August 2004 16:01
 
|
 |
The swap is straight forward. The floors are the same, and you can bolt everything up. Yes you'll also need the manual tailshaft, they're different to the auto units. Clutch is hydraulic, so you'll need all the associated parts too for that, and the crossmember will bolt straight in. You should be able to use the speedo cable thats there from memory too.
I'f you want a manual car, then yes the job's worth doing! As for parts sourcing, look for a manual TA22 being wrecked and buy everything in one go, that way you can use the disassembly also as an installation guide. A good used gearbox can be bought for around $50-100 these days, and the only rego issue you will have is to notify the transport mob in your state that the car is now a manual, not an auto!
Clint
|
|
|
| | Subject | Poster | Date |
|---|
 |
TA22 auto to manual swap?
|
mightyrollaman | Sun, 15 August 2004 15:48 |
|
Re: TA22 auto to manual swap?
|
CLG | Sun, 15 August 2004 16:01 |
|
Re: TA22 auto to manual swap?
|
toyoTA22 | Mon, 16 August 2004 00:39 |
|
Re: TA22 auto to manual swap?
|
CLG | Mon, 16 August 2004 01:50 |
|
Re: TA22 auto to manual swap?
|
joecoolmk2 | Tue, 17 August 2004 01:50 |
|
Re: TA22 auto to manual swap?
|
Tommo | Tue, 17 August 2004 01:58 |
|
Re: TA22 auto to manual swap?
|
fade-e | Tue, 17 August 2004 02:23 |
|
Re: TA22 auto to manual swap?
|
joecoolmk2 | Tue, 17 August 2004 02:31 |
|
Re: TA22 auto to manual swap?
|
fade-e | Tue, 17 August 2004 02:44 |
|
Re: TA22 auto to manual swap?
|
joecoolmk2 | Wed, 18 August 2004 01:33 |
