| Author | Topic |
|---|
I supported Toymods
Location:
Berowra-Sydney
Registered:
July 2002
|
|
Re: Can 18R-C head gasket be used in 18R-G
|
Fri, 27 September 2002 22:14
|
 |
|
to find TDC its usually the easiest to turn it until the rotor points at the number one piston on the distributor cover thats when it should be at top dead centre on the compression stroke and if you want to make sure it is exactly on TDC then with the rocker cover off move the crank a little more to the point where both valves are closed and a little more either way will begin to open one of the valves.
|
|
|
