| Author | Topic |
|---|
Location:
Canberra
Registered:
May 2002
|
|
Re: W58, 225 or 235 mm cover??
|
Tue, 17 August 2004 12:00
|
 |
After seeing quite a few new clutches installed and slipping within a short time. It has been suggested to me that the best way to ensure a correct clutch fit, and therefore reduce/eliminate slippage, is to supply the flywheel machinist with the flywheel, clutchplate and pressure plate.
The step on the flywheel is critical, as is the thickness of both the clutch plate, and the pressure plate. If the step and/or your clutch plate are too thick, the pressure plate will have "rocked over centre" ie. the clutch is in the first stages of release!  Best bet, buy your clutch and pressure plate from the guy who machines your flywheel.
regards Chuck.
[Updated on: Tue, 17 August 2004 12:02]
|
|
|
| | Subject | Poster | Date |
|---|
 |
W58, 225 or 235 mm cover??
|
boxh34d | Thu, 12 August 2004 11:51 |
|
Re: W58, 225 or 235 mm cover??
|
wilbo666 | Thu, 12 August 2004 12:12 |
|
Re: W58, 225 or 235 mm cover??
|
boxh34d | Thu, 12 August 2004 12:18 |
|
Re: W58, 225 or 235 mm cover??
|
YelloRolla | Thu, 12 August 2004 13:32 |
|
Re: W58, 225 or 235 mm cover??
|
wilbo666 | Thu, 12 August 2004 13:34 |
|
Re: W58, 225 or 235 mm cover??
|
boxh34d | Fri, 13 August 2004 06:09 |
|
Re: W58, 225 or 235 mm cover??
|
YelloRolla | Fri, 13 August 2004 06:14 |
|
Re: W58, 225 or 235 mm cover??
|
Norbie | Fri, 13 August 2004 06:22 |
|
Re: W58, 225 or 235 mm cover??
|
boxh34d | Fri, 13 August 2004 08:24 |
|
Re: W58, 225 or 235 mm cover??
|
Looonie | Mon, 16 August 2004 23:21 |
|
Re: W58, 225 or 235 mm cover??
|
Norbie | Mon, 16 August 2004 23:34 |
|
Re: W58, 225 or 235 mm cover??
|
Looonie | Mon, 16 August 2004 23:47 |
|
Re: W58, 225 or 235 mm cover??
|
wilbo666 | Tue, 17 August 2004 01:15 |
|
Re: W58, 225 or 235 mm cover??
|
gianttomato | Tue, 17 August 2004 02:07 |
|
Re: W58, 225 or 235 mm cover??
|
Looonie | Tue, 17 August 2004 05:17 |
|
Re: W58, 225 or 235 mm cover??
|
ChuckLandwehr | Tue, 17 August 2004 12:00 |
| Current Time:
Thu Jan 16 00:14:19 UTC 2025 |
Total time taken to generate the page: 0.011523962020874 seconds |
