Toymods Car Club Inc: Tech & Conversions => KE20 brake upgrade, GIVE ME ANSWERS!!!!

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » KE20 brake upgrade, GIVE ME ANSWERS!!!! Show: Today's Posts :: Show Polls Email to friend

Author

Topic

YelloRolla
Forums Junkie

Location:
On your mum!
Registered:
May 2002

Re: KE20 brake upgrade, GIVE ME ANSWERS!!!!	Wed, 18 August 2004 13:16

the way that I did mine (and I am not recommending it) is 1) fit Nissan 180B struts with 240K tops - I swapped left to right and swapped the springs back (after visiting them with a gas axe). 2) modded some nissan pintara 10" vented discs to fit the 180B hubs 3) bolted on some '95 HiLux calipers (use 1199? as opposed to 1149? pads) 4) made spacers for the brake pads (so pistons didn't fall out when pads are worn) 5) modded Kmac top of strut camber/caster adjusters 6) lengthened lower control arms by 10mm so as to get Zero camber (camber was a big issue) 7) Used Mitsubishi L300 master cylinder (modded pedal box and firewall) remote mounted PBR VH44 brake booster 9) made custom lines for the whole shooting match 10) fitted borg warner diff out back with skyline (HR31) discs Fronts only are assisted Car stops Currently thinking of a better way to do it in future - like custom stub axles onto the corolla struts with perhaps VT commode calipers and discs. [Report message to a moderator]

Current Time: Sat Jun 28 15:50:00 UTC 2025

Total time taken to generate the page: 0.0049519538879395 seconds

.:: Contact :: Home ::.