F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » How can i work my 4K motor? Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
5KinKP60 Regular Location: Finland Registered: June 2002	Re: How can i work my 4K motor? Sun, 29 September 2002 11:59 Strip ignition distributor into bits. Limit advance mechanism travel movement. Original has too wide operating range for a tuned engine (i.e. sporty camshaft grind installed). You need more advance in idle/lower rpm range - but about the same advance as standard engine when in high rpm. Rough guide - set idle advance to about 12 to 16 degrees BTDC. Make all advance come in at about 3500 to 3800 rpm. Max total advance about 34 degrees. Experiment with one distributor bob weight only, stuff the stronger spring (most likely). That will make engine run _much_ smoother than ridiciously advanced standard distributor mechanism, and will make more power too. Also having std distributor advanced like there is no tomorrow will help engine to knock under acceleration. That's no good. -A. [Report message to a moderator]

	Subject	Poster	Date
	How can i work my 4K motor?	marty	Mon, 05 August 2002 09:01
	Re: How can i work my 4K motor?	Grega	Mon, 05 August 2002 09:11
	Re: How can i work my 4K motor?	mrshin	Mon, 05 August 2002 12:37
	Re: How can i work my 4K motor?	marty	Tue, 06 August 2002 05:36
	Re: How can i work my 4K motor?	4-AGE.T-18	Sat, 10 August 2002 12:43
	Re: How can i work my 4K motor?	Apollo	Sat, 10 August 2002 13:43
	Re: How can i work my 4K motor?	Kiwi Jake	Sun, 29 September 2002 09:34
	Re: How can i work my 4K motor?	5KinKP60	Sun, 29 September 2002 11:59
	Re: How can i work my 4K motor?	corolla coupe 18rgu	Mon, 30 September 2002 11:47
	Re: How can i work my 4K motor?	physh	Mon, 30 September 2002 12:32

Previous Topic:	3tgte head tension
Next Topic:	MR2 Radiator

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.