Toymods Car Club Inc: General Car Talk => STEELIES FOR US MA70 BOYS!!

Toymods Car Club
www.toymods.org.au

F.A.Q.

Home

Members

Toymods » General Car Talk » STEELIES FOR US MA70 BOYS!! Show: Today's Posts :: Show Polls Email to friend

Author

Topic

wastegate
Regular

Location:
Gold Coast
Registered:
May 2002

Re: STEELIES FOR US MA70 BOYS!!

Fri, 20 August 2004 23:17

V8_MA61 wrote on Fri, 20 August 2004 21:16

I bought some steelies last week.
Off an AU falcon. 16x6.5"

test fitted to ma70, they are a perfect fit, dont hit anything, clear everything nicely...so a good rim for some racing slicks Smile

All the better for me for the ma70 rear end going into my ma61 Very Happy

Anyway something for you guys with hot 70s!

Blake

First of all a 16" rim for drag slicks is NOT a good idea. You want a 15". Why it's not a good idea is that you will not find a drag slick in a 16" size easly.

6.5" wide is really bordering on too small for a drag slick, you don't want rear end movement at 160-170kph+

Look for an AU persuit rim from a cop car. They are a 15 inch rim and fit fine on the rear, you might want to widen them also to 8" for a 235 slick.

Also I'll add it starts to get dangerous running a drag slick on the back with normal street rubber on the front, you want front runners if you are going quicker than 13's.. The amount of movement you get in the deep end with front radials is scary.

Now if you think this is all too much just get another set of sawblades and stick a set of Nitto 550 or BFG Street Slicks on, if Supras can run into the 9.5's with them then they are not that bad.

Now if you were doing curcuit racing that is a whole different story. (Light rim with right sized slicks and proper pressures)

[Updated on: Fri, 20 August 2004 23:17]

[Report message to a moderator]

[Message index]

-=] Back to Top [=-

Current Time: Sun Jan 12 15:02:56 UTC 2025

Total time taken to generate the page: 0.0072009563446045 seconds

.:: Contact :: Home ::.