| Author | Topic |
|---|
Location:
Brisbane
Registered:
June 2003
|
|
Re: 7M crank pully removal
|
Mon, 23 August 2004 05:41
 
|
 |
i had 2 people, and what i did was put two bolts in the pulley (there are threaded holes in the pulley itself) and then wedge a huge screwdriver between the two to use it as a lever so to speak, whilst the other person had the breaker bar and a piece of pipe over it.
MUCH safer than cranking the engine over if you have never done it before.
|
|
|
| | Subject | Poster | Date |
|---|
 |
7M crank pully removal
|
7mgte83 | Mon, 23 August 2004 04:51 |
|
Re: 7M crank pully removal
|
Norbie | Mon, 23 August 2004 05:19 |
|
Re: 7M crank pully removal
|
gianttomato | Mon, 23 August 2004 05:37 |
|
Re: 7M crank pully removal
|
V8_MA61 | Mon, 23 August 2004 05:41 |
|
Re: 7M crank pully removal
|
twincam_ke20 | Mon, 23 August 2004 08:13 |
|
Re: 7M crank pully removal
|
THE WITZL | Mon, 23 August 2004 08:33 |
|
Re: 7M crank pully removal
|
V8_MA61 | Mon, 23 August 2004 08:58 |
|
Re: 7M crank pully removal
|
THE WITZL | Mon, 23 August 2004 08:36 |
|
Re: 7M crank pully removal
|
THE WITZL | Mon, 23 August 2004 09:05 |
|
Re: 7M crank pully removal
|
V8_MA61 | Mon, 23 August 2004 09:47 |
|
Re: 7M crank pully removal
|
ed_ma61 | Mon, 23 August 2004 09:44 |
|
Re: 7M crank pully removal
|
7mgte83 | Mon, 23 August 2004 12:12 |
|
Re: 7M crank pully removal
|
dingaling | Mon, 23 August 2004 12:33 |
|
Re: 7M crank pully removal
|
Toobs | Mon, 23 August 2004 21:34 |
|
Re: 7M crank pully removal
|
justcallmefrank | Mon, 23 August 2004 12:49 |
|
Re: 7M crank pully removal
|
thechuckster | Mon, 23 August 2004 13:23 |
