| Author | Topic |
|---|
Location:
brisvegas
Registered:
August 2004
|
|
Re: 4age 20v putting turbo or 4agze motor please advice
|
Thu, 26 August 2004 04:29
 
|
 |
although thier different part numbers (i think), the 20v rods and crank are the same size and strength as the ZE's, the difference is that the ZE has lower compression pistons, you could help the life of your 20v if you put a slightly thicker head gasket in, just to reduce the static compression abit,
OR
whack in a GZE complete bottom end, bolt the 20v head on the top straight on swap, a few little things here and there.. and turn up the boost!! seen the speed tech corolla? 84' 300kw at the tyres, on the stock bottom end!! AHHHH!!!!!!
[Updated on: Thu, 26 August 2004 05:00]
|
|
|
