Author | Topic |
I supported Toymods
Location: Oyster bay NSW
Registered: May 2002
|
Re: 18rgu redline??
|
Tue, 01 October 2002 03:13
|
|
THE WITZL wrote on Tue, 01 October 2002 10:30 |
crostek - how would i go about avoiding these dizzy problems with a carbied engine? something like the jaycar ignition kit? what? cos im going to get some cam and headwork done soonish and i want to know how to avoid these rpm limitations.
i also wouldn't mind learning more about your 18r-turbo motor!
|
I don't think the just putting a jaycar kit on will help, I have used one a long time ago and it help a little but it not good for real high end work.I think the best path to go is to get a electronic dizzy, igniter and coil, then have the dizzy graphed to suit the advance curve you need. (I have the old one from my car if you want it) And start from there. I put in an optical crank angle sensor, and did away with the dizzy all together.
At the moment I have the car in bits and sold off my old turbo and supercharger set-ups to pay a deposit on my new house, the motor has the following done to it. The crank is full counter weighted and hardened, the rods were reconditioned and shot penned. The pistons are VW forged 90.5mm OD, rings are gapless, the head has had holden 308 V8 valve seats and one piece stainless valves installed, then been ported out to suit the seats and match ported to the EFI manifold. The cams are a special grind from Ivan Tighe, and are on vernier cam gears. The valve springs are a double spring that the engine builder got for me, and not sure what there from I think there from a lotus. Plus lots of other little things that would take to long to list.
|
|
|
| Subject | Poster | Date |
|
18rgu redline??
|
THE WITZL | Mon, 30 September 2002 02:56 |
|
Re: 18rgu redline??
|
sbyder | Mon, 30 September 2002 03:48 |
|
Re: 18rgu redline??
|
ra23celicachick | Mon, 30 September 2002 04:10 |
|
Re: 18rgu redline??
|
THE WITZL | Mon, 30 September 2002 04:44 |
|
Re: 18rgu redline??
|
ra23celicachick | Mon, 30 September 2002 06:44 |
|
Re: 18rgu redline??
|
CelicaRA45 | Mon, 30 September 2002 07:17 |
|
Re: 18rgu redline??
|
Jonny2TG | Mon, 30 September 2002 04:59 |
|
Re: 18rgu redline??
|
Norbie | Mon, 30 September 2002 07:37 |
|
Re: 18rgu redline??
|
THE WITZL | Mon, 30 September 2002 08:22 |
|
Re: 18rgu redline??
|
GIN51E | Mon, 30 September 2002 09:26 |
|
Re: 18rgu redline??
|
Norbie | Tue, 01 October 2002 00:59 |
|
Re: 18rgu redline??
|
M.W.P. | Mon, 30 September 2002 09:38 |
|
Re: 18rgu redline??
|
Hunty | Mon, 30 September 2002 17:36 |
|
Re: 18rgu redline??
|
Grega | Mon, 30 September 2002 19:57 |
|
Re: 18rgu redline??
|
crostek | Mon, 30 September 2002 22:01 |
|
Re: 18rgu redline??
|
wil8115 | Tue, 08 October 2002 12:11 |
|
Re: 18rgu redline??
|
crostek | Tue, 08 October 2002 21:51 |
|
Re: 18rgu redline??
|
ra23celicachick | Mon, 30 September 2002 22:37 |
|
Re: 18rgu redline??
|
THE WITZL | Tue, 01 October 2002 00:30 |
|
Re: 18rgu redline??
|
crostek | Tue, 01 October 2002 03:13 |
|
Re: 18rgu redline??
|
Norbie | Tue, 01 October 2002 00:56 |
|
Re: 18rgu redline??
|
THE WITZL | Tue, 01 October 2002 07:01 |
|
Re: 18rgu redline??
|
GIN51E | Tue, 01 October 2002 08:16 |
|
Re: 18rgu redline??
|
sbyder | Tue, 01 October 2002 08:31 |
|
Re: 18rgu redline??
|
THE WITZL | Tue, 01 October 2002 23:15 |
|
Re: 18rgu redline??
|
Mr DOHC | Wed, 09 October 2002 01:09 |
Current Time:
Fri Jan 24 01:47:09 UTC 2025 |
Total time taken to generate the page: 0.0051381587982178 seconds |