| Author | Topic |
|---|
Location:
Brisbane
Registered:
February 2003
|
|
Re: Broken Cam Shaft.
|
Thu, 26 August 2004 10:51
 
|
 |
when i had the head in my galant welded (BHG and corrosion) and re-straightened at bryant engineering, they line bored the cam tunnel.
old alloy heads that get welded do walk around a bit and can grab the cam - if you have new bearings and rebuilt cam (finer tolerance between wear face and bearing).
|
|
|
| | Subject | Poster | Date |
|---|
 |
Broken Cam Shaft.
|
Lambolica | Thu, 26 August 2004 01:05 |
|
Re: Broken Cam Shaft.
|
Toobs | Thu, 26 August 2004 01:31 |
|
Re: Broken Cam Shaft.
|
Norbie | Thu, 26 August 2004 02:03 |
|
Re: Broken Cam Shaft.
|
Toobs | Thu, 26 August 2004 02:27 |
|
Re: Broken Cam Shaft.
|
CLG | Thu, 26 August 2004 02:37 |
|
Re: Broken Cam Shaft.
|
Lambolica | Thu, 26 August 2004 03:26 |
|
Re: Broken Cam Shaft.
|
Mr DOHC | Thu, 26 August 2004 10:37 |
|
Re: Broken Cam Shaft.
|
thechuckster | Thu, 26 August 2004 10:51 |
|
Re: Broken Cam Shaft.
|
Toobs | Thu, 26 August 2004 11:50 |
|
Re: Broken Cam Shaft.
|
kaos | Thu, 26 August 2004 12:47 |
