Location: Bottom of the hill, Sydney
Registered: April 2004
Re: TA22 High Beam...
Mon, 30 August 2004 09:57
Search the tech & conversion section for a thread titled
Ta22 and flasher unit/sss
In this thread there is a post by Azrael which has a link to a wiring diagram for a TA22. Have a look at the colour coded diagram. It is easier to follow. I would suggest checking your dipper switch wiring with a test light. It switches the negative to change beams.
With the headlights on and the dipper switch unplugged try earthing the red/yellow wire then the red/green wire. This should trigger the high and low beams. If the lights work check for an earth at the dipper switch (should be white/black).
If all the wiring checks out try a new dipper switch.
Mon, 30 August 2004 09:57
