| Author | Topic |
|---|
Location:
Kita-Ku, Sapporo, Japan
Registered:
January 2003
|
|
Re: 3K head to 4K block, wher from here
|
Mon, 06 September 2004 04:50
|
 |
further to that
22010 is K bigport
24010 is 3K bigport.
the main difference is 30mm diameter intake ports vs 27mm ones (or 25mm on some motors!!)
bigports also have o-ring valve seals (and a corresponding dual groove valve) and are not suitable for higher lift cams. change over to normal single groove valves and their corresponding retainers and all good. might want to change guides to accept stem seals if you are getting reco'd..
my local does reco for about $130. (sydney clutch and brake)
Cya, Stewart
|
|
|
| | Subject | Poster | Date |
|---|
 |
3K head to 4K block, wher from here
|
scano | Tue, 24 August 2004 10:44 |
|
Re: 3K head to 4K block, wher from here
|
pro_ke | Wed, 25 August 2004 01:58 |
|
Re: 3K head to 4K block, wher from here
|
scano | Wed, 25 August 2004 02:17 |
|
Re: 3K head to 4K block, wher from here
|
pro_ke | Wed, 25 August 2004 02:28 |
|
Re: 3K head to 4K block, wher from here
|
scano | Wed, 25 August 2004 02:52 |
|
Re: 3K head to 4K block, wher from here
|
pro_ke | Wed, 25 August 2004 04:08 |
|
Re: 3K head to 4K block, wher from here
|
HyDrA | Wed, 25 August 2004 04:17 |
|
Re: 3K head to 4K block, wher from here
|
pro_ke | Wed, 25 August 2004 04:20 |
|
Re: 3K head to 4K block, wher from here
|
HyDrA | Wed, 25 August 2004 04:24 |
|
Re: 3K head to 4K block, wher from here
|
scano | Sat, 28 August 2004 02:16 |
|
Re: 3K head to 4K block, wher from here
|
HyDrA | Sat, 28 August 2004 02:24 |
|
Re: 3K head to 4K block, wher from here
|
towe_001 | Sat, 28 August 2004 11:08 |
|
Re: 3K head to 4K block, wher from here
|
oldcorollas | Mon, 06 September 2004 04:50 |
