| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Engine conversion - should I convert to manual at the same time?
|
Thu, 03 October 2002 08:27
 
|
 |
Yes you modify your existing tailshaft (well the front section anyway), but typically a driveshaft shop will just weld your existing flange and yoke to a new tube of the correct length.
Of course the easiest way would be to find a factory tailshaft from a JZA70 Supra, but they're probably not easy to find!
The strength of the tailshaft is very relevant to the power output of your engine, since the tailshaft transmits the power from the engine to the wheels! However I imagine all Mk3 tailshafts are the same spec (including turbo models) so it should be plenty strong.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Engine conversion - should I convert to manual at the same time?
|
Rattlehead | Sat, 28 September 2002 07:59 |
|
Re: Engine conversion - should I convert to manual at the same time?
|
Youngy | Sat, 28 September 2002 14:40 |
|
Re: Engine conversion - should I convert to manual at the same time?
|
Rattlehead | Sat, 28 September 2002 15:24 |
|
Re: Engine conversion - should I convert to manual at the same time?
|
BigWorm | Sun, 29 September 2002 00:47 |
|
Re: Engine conversion - should I convert to manual at the same time?
|
Rattlehead | Mon, 30 September 2002 10:25 |
|
Re: Engine conversion - should I convert to manual at the same time?
|
Norbie | Mon, 30 September 2002 11:54 |
|
Re: Engine conversion - should I convert to manual at the same time?
|
Rattlehead | Tue, 01 October 2002 10:26 |
|
Re: Engine conversion - should I convert to manual at the same time?
|
JAZE | Tue, 01 October 2002 11:33 |
|
Re: Engine conversion - should I convert to manual at the same time?
|
Cressida Supra | Wed, 02 October 2002 17:17 |
|
Re: Engine conversion - should I convert to manual at the same time?
|
Rattlehead | Thu, 03 October 2002 05:41 |
|
Re: Engine conversion - should I convert to manual at the same time?
|
Norbie | Thu, 03 October 2002 08:27 |
|
Re: Engine conversion - should I convert to manual at the same time?
|
Rattlehead | Thu, 03 October 2002 14:22 |
