Toymods Car Club Inc: Tech & Conversions => URGENT !!! - Need info & part no.s for 4AGZE conversion

Toymods Car Club
www.toymods.org.au

Toymods » Tech & Conversions » URGENT !!! - Need info & part no.s for 4AGZE conversion Show: Today's Posts :: Show Polls Email to friend

Author

Topic

BigWorm
Forums Junkie

Toymods Board Member
I supported Toymods

Location:
Turramurra, Sydney.
Registered:
May 2002

Re: URGENT !!! - Need info & part no.s for 4AGZE conversion	Thu, 03 October 2002 12:32

Timing belt & thermostat, yeah, they'd be the same. Alternator etc belts, just take samples up to the local Auto 1 or whatever. Spark plugs, platinum is standard I think. I don't think there's lots of performance to gain, copper plugs must be replaced more often but are shitloads cheaper. Brake fluid, get someone elses opinion! Clutch, RPM (brand name owned by PBR) make some pretty good clutch kits, I don't know if they would make one to fit a GZE flywheel, which from memory is bigger than 212mm? I though 88Kw was 200, 100Kw was 212, and GZE was 220 or something? Anyway, someone will know for sure. Box oil & charger oil someone else can advise you on. Engine oil, I reckon Mobil 1 5W-50 is too thin for our climate, especially with the approach of summer. I would go with at least a 15W-50. Core/welsh plugs, I would leave alone unless they look dodgy. The other stuff, I dunno. [Report message to a moderator]

Current Time: Sun Jul 20 02:53:57 UTC 2025

Total time taken to generate the page: 0.0039370059967041 seconds

.:: Contact :: Home ::.