| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
Re: Clutch type and size for GZE ae101 e51/8 box
|
Fri, 04 October 2002 01:45
 
|
 |
TRD has two clutch sizes for the gze, one is 225mm, the other is 230mm. From what I have gathered, the 230mm setup is on the late map sensored ae92 gze's and also the ae101 gze's. I have been trying to source a 230mm kit for my gze, and it seems that Daikin make a standard and heavy duty kit for only the 225mm setup. The PCD of the bolt holes for the clutch cover are different between the two, 250mm v's 253mm so you cant use a 225mm kit on a 230mm clutch's flywheel cause the pressure plate wont bolt-up. Trevor from Brake Distributors of Australia has been extremely helpful with sorting out my clutch dilemma, and I am currently having my original 230mm clutch setup re-built as a sprung center ceramic plate with carbolic facing's, and an uprated pressure plate to suit. They are also lightening and re-balancing my gze flywheel at the same time, the whole setup is not costing me much more than a standard Daikin HD kit, and it will be a much better clutch!
You can contact Trevor at http://www.brakedistributors.com.au/
Jason
|
|
|
