F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Another turbo question Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
TA22-3SGTE Regular Location: MACKAY Registered: May 2002	Re: Another turbo question Thu, 09 September 2004 14:45 OK I will try to explain , If when on cruise at 3000 rpm the throttle is say 10 percent open and the manifold vacuum is at 10 inches mercury the load point in the ecu map will be on a lean cruise mixture and producing say 15 kw's power , there is not enought exhaust gases to spool up the turbo , but when you come to a hill the motor is then loaded up a bit and rpm drops a little and the manifold pressure rises to say 5 inches mercury , now the load point in the ecu map at this pressure will increase the fuel and inturn will produce more power which = more exhaust gases which will start to spool up the turbo and lift the pressure in the manifold . Dose that make any sense !! Trevor [Report message to a moderator]

	Subject	Poster	Date
	Another turbo question	d-shiznit	Thu, 09 September 2004 10:05
	Re: Another turbo question	Cyber-punk	Thu, 09 September 2004 10:30
	Re: Another turbo question	Norbie	Thu, 09 September 2004 10:43
	Re: Another turbo question	d-shiznit	Thu, 09 September 2004 11:09
	Re: Another turbo question	Cyber-punk	Thu, 09 September 2004 10:47
	Re: Another turbo question	Cyber-punk	Thu, 09 September 2004 11:12
	Re: Another turbo question	d-shiznit	Thu, 09 September 2004 11:51
	Re: Another turbo question	d-shiznit	Thu, 09 September 2004 11:53
	Re: Another turbo question	thomasbl	Thu, 09 September 2004 12:39
	Re: Another turbo question	d-shiznit	Thu, 09 September 2004 12:53
	Re: Another turbo question	TA22-3SGTE	Thu, 09 September 2004 14:45
	Re: Another turbo question	d-shiznit	Fri, 10 September 2004 04:28
	Re: Another turbo question	Norbie	Thu, 09 September 2004 13:45
	Re: Another turbo question	Mx62	Thu, 09 September 2004 14:09
	Re: Another turbo question	pannelvan_screema	Thu, 09 September 2004 15:30
	Re: Another turbo question	stark	Thu, 09 September 2004 15:52
	Re: Another turbo question	Norbie	Fri, 10 September 2004 04:54
	Re: Another turbo question	d-shiznit	Sat, 11 September 2004 04:18

Previous Topic:	Chrome plating
Next Topic:	Turbo knowledge

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.