| Author | Topic |
|---|
Location:
Hobart
Registered:
June 2002
|
|
Re: Ign coil wiring
|
Fri, 10 September 2004 05:52
 
|
 |
a condensor is a capacitor. used on points systems to stop the primary flyback voltage going to high and burning out the points.
oldcorollas is right. switched 12V volts to coil (via balast resistor maybe), dizzy on negative side, tacho on negative side.
if ballast resister is used there is probably another wire going directly to positive side of coil which gets 12V when cranking, this compensates for low battery voltage while cranking.
btw, an ignition coil is an inductor.
|
|
|
| | Subject | Poster | Date |
|---|
 |
Ign coil wiring
|
greenta22 | Thu, 09 September 2004 07:31 |
|
Re: Ign coil wiring
|
oldcorollas | Thu, 09 September 2004 07:46 |
|
Re: Ign coil wiring
|
greenta22 | Thu, 09 September 2004 07:50 |
|
Re: Ign coil wiring
|
oldcorollas | Thu, 09 September 2004 08:00 |
|
Re: Ign coil wiring
|
greenta22 | Thu, 09 September 2004 08:09 |
|
Re: Ign coil wiring
|
Cyber-punk | Thu, 09 September 2004 08:50 |
|
Re: Ign coil wiring
|
greenta22 | Thu, 09 September 2004 09:47 |
|
Re: Ign coil wiring
|
Cyber-punk | Thu, 09 September 2004 09:58 |
|
Re: Ign coil wiring
|
greenta22 | Thu, 09 September 2004 10:59 |
|
Re: Ign coil wiring
|
Cyber-punk | Thu, 09 September 2004 11:05 |
|
Re: Ign coil wiring
|
RA40Celica | Fri, 10 September 2004 05:52 |
|
Re: Ign coil wiring
|
Cyber-punk | Fri, 10 September 2004 08:16 |
|
Re: Ign coil wiring
|
RA28 | Fri, 10 September 2004 10:27 |
|
Re: Ign coil wiring
|
greenta22 | Fri, 10 September 2004 11:28 |
|
Re: Ign coil wiring
|
greenta22 | Fri, 17 September 2004 10:01 |
|
Re: Ign coil wiring
|
brett_celicacoupe | Sat, 18 September 2004 10:21 |
|
Re: Ign coil wiring
|
sideshow | Sat, 18 September 2004 13:55 |
|
Re: Ign coil wiring
|
greenta22 | Sun, 19 September 2004 04:43 |
