| Author | Topic |
|---|
Location:
Newcastle NSW
Registered:
June 2002
|
|
Re: Removing Bump Strips
|
Fri, 04 October 2002 23:38
 
|
 |
BOG IS BAD!!!!  for that purpose anyway. if you can get to the back of the panel easily a small sheet of fiberglass is the go, if access is a bit harder (but you can still get a finger to the back of the hole) then use a fiberglass reinforced body filler. if you cannot access the back of the hole at all then it becomes tricky, you need a small piece of mesh or anything you can physically fit into the hole thats not absorbent that you can also attach a bit of fine wire to. Then jam it thru the hole squeeeze some fibreglass body filler in and pull the wire to squish the filler out at the back to make it strong!.
its time consuming but when done properly a loud stereo cant budge it
|
|
|
| | Subject | Poster | Date |
|---|
 |
Removing Bump Strips
|
justcallmefrank | Fri, 04 October 2002 09:20 |
|
Re: Removing Bump Strips
|
Rolla Boy | Fri, 04 October 2002 12:47 |
|
Re: Removing Bump Strips
|
humble | Fri, 04 October 2002 12:55 |
|
Re: Removing Bump Strips
|
Alainve | Fri, 04 October 2002 23:38 |
|
Re: Removing Bump Strips
|
Youngy | Fri, 04 October 2002 23:40 |
|
Re: Removing Bump Strips
|
wizzfizz2097 | Sat, 05 October 2002 00:48 |
|
Re: Removing Bump Strips
|
CrAiGzEE | Sat, 05 October 2002 07:25 |
|
Re: Removing Bump Strips
|
rollaboy | Sat, 05 October 2002 10:05 |
|
Re: Removing Bump Strips
|
jase | Sat, 05 October 2002 11:39 |
|
Re: Removing Bump Strips
|
justcallmefrank | Sat, 05 October 2002 12:52 |
|
Re: Removing Bump Strips
|
jazae86 | Sat, 05 October 2002 14:57 |
|
Re: Removing Bump Strips
|
EVOSTi | Mon, 07 October 2002 11:53 |
|
Re: Removing Bump Strips
|
Hunty | Mon, 07 October 2002 12:11 |
|
Re: Removing Bump Strips
|
jazae86 | Mon, 07 October 2002 12:15 |
