| Author | Topic |
|---|
Location:
Coffs
Registered:
May 2002
|
|
Re: 100kw conversion
|
Sun, 06 October 2002 05:06
 
|
 |
What are the Specs for the Jap version of the 4AGE TVIS Blue Top with MAP sensor??
On this site http://home.clear.net.nz/pages/phil.bradshaw/4AGE% 20into%20RWD.htm it says .
Produced 83.5-87.5
Engine 4A-GEU
Capacity (cc) 1587
Bore x Stroke (mm) 81.0x77.7
Comp Ratio 9.4
Load Signal MAP
Induction & Head TVIS Big Port head
No of Ribs on Block 3
Gudgeon Pin Dia (mm) 18
Big End Dia (mm) 40
Crank Journal Dia (mm) 48
Oil Cooled Pistons No
Ignition Distributor
Cam Cover Writing Blue & Black
PS @ rpm 130 @ 6600
kg-m @ rpm 15.2 @ 5200
kW @ rpm 95.5 @ 6600
Nm @ rpm 149 @ 5200
Is this right??
|
|
|
| | Subject | Poster | Date |
|---|
 |
100kw conversion
|
Kiwi Jake | Thu, 03 October 2002 10:26 |
|
Re: 100kw conversion
|
redrollaboy | Thu, 03 October 2002 12:57 |
|
Re: 100kw conversion
|
Kiwi Jake | Sat, 05 October 2002 00:02 |
|
Re: 100kw conversion
|
jazae86 | Thu, 03 October 2002 14:15 |
|
Re: 100kw conversion
|
jazae86 | Thu, 03 October 2002 14:16 |
|
Re: 100kw conversion
|
Kiwi Jake | Sat, 05 October 2002 09:44 |
|
Re: 100kw conversion
|
dorikin | Sun, 06 October 2002 03:44 |
|
Re: 100kw conversion
|
rollaboy | Sun, 06 October 2002 05:06 |
|
Re: 100kw conversion
|
chrisss | Sun, 06 October 2002 09:19 |
|
Re: 100kw conversion
|
jazae86 | Sun, 06 October 2002 12:20 |
|
Re: 100kw conversion
|
dorikin | Sun, 06 October 2002 12:28 |
|
Re: 100kw conversion
|
rollaboy | Mon, 07 October 2002 09:44 |
|
Re: 100kw conversion
|
jazae86 | Mon, 07 October 2002 10:30 |
|
Re: 100kw conversion
|
chrisss | Tue, 08 October 2002 09:50 |
|
Re: 100kw conversion
|
mrshin | Tue, 08 October 2002 14:11 |
|
Re: 100kw conversion
|
dorikin | Wed, 09 October 2002 08:12 |
|
Re: 100kw conversion
|
inertia | Wed, 09 October 2002 08:44 |
|
Re: 100kw conversion
|
dorikin | Wed, 09 October 2002 09:25 |
|
Re: 100kw conversion
|
rollaboy | Wed, 09 October 2002 12:40 |
|
Re: 100kw conversion
|
shoom | Fri, 22 April 2005 15:44 |
|
Re: 100kw conversion
|
Mr Revhead | Fri, 22 April 2005 23:04 |
