F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Ring gears, pinion gears, ratios etc Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
ra23celica Forums Junkie Registered: November 2002	Re: Ring gears, pinion gears, ratios etc Tue, 14 September 2004 05:47 The lads above have it right, you must buy the ring and pinion as a matched/lapped set, and after counting teeth in my RA23 diff centre, its a 41/10 combination for a final drive ratio of 4.100 exactly. Now, if you like working parts miracles, here is one for you. Search all your import yards and wreckers for a grey import YM40 Liteace van, and you need it to be 4WD and in a manual (only). They have a front (yes - front, and the rear is an E or F series diff) differential ratio of 4.3:1 (43/10) and 6.7 inch ring gear diameter, making it a 'T' series diff, in a manner of speaking. You won't be able to use the housing, but the internals of this will fit your RA23/28 diff housing. I learned this from a kiwi friend who said that this swap has been done successfully in NZ for some time now. And yes, good luck - goes without saying really. Mitch. [Report message to a moderator]

	Subject	Poster	Date
	Ring gears, pinion gears, ratios etc	demuire	Tue, 14 September 2004 04:11
	Re: Ring gears, pinion gears, ratios etc	demuire	Tue, 14 September 2004 04:14
	Re: Ring gears, pinion gears, ratios etc	mrshin	Tue, 14 September 2004 04:16
	Re: Ring gears, pinion gears, ratios etc	Norbie	Tue, 14 September 2004 04:17
	Re: Ring gears, pinion gears, ratios etc	bbaacchhyy	Tue, 14 September 2004 04:51
	Re: Ring gears, pinion gears, ratios etc	demuire	Tue, 14 September 2004 04:22
	Re: Ring gears, pinion gears, ratios etc	demuire	Tue, 14 September 2004 05:01
	Re: Ring gears, pinion gears, ratios etc	TurboRA28	Tue, 14 September 2004 05:06
	Re: Ring gears, pinion gears, ratios etc	demuire	Tue, 14 September 2004 05:32
	Re: Ring gears, pinion gears, ratios etc	ra23celica	Tue, 14 September 2004 05:47
	Re: Ring gears, pinion gears, ratios etc	Norbie	Tue, 14 September 2004 05:53
	Re: Ring gears, pinion gears, ratios etc	demuire	Tue, 14 September 2004 06:05
	Re: Ring gears, pinion gears, ratios etc	Simon-AE86	Tue, 14 September 2004 06:36
	Re: Ring gears, pinion gears, ratios etc	IRA11Y	Tue, 14 September 2004 06:50
	Re: Ring gears, pinion gears, ratios etc	demuire	Tue, 14 September 2004 07:03

Previous Topic:	1G flywheel bolts
Next Topic:	another 18r related question OIL PUMP

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.