| Author | Topic |
|---|
Club Member
Location:
sydney
Registered:
May 2002
|
|
Re: FS: 4AGE Carby Manifold
|
Mon, 07 October 2002 01:13
 
|
 |
Trueno
Yep its easy to send to melbourne, being alloy its nice and light so freight shouldnt be too much either.
Yes the manifold is to suit a bigport 4AGE
Yes it bolts straight on to the existing bolt pattern, you will have to block off the injector ports on the head somehow though and most likely use some shorter studs as the factory ones are a little too long and will not allow you to bolt it up properly, you can use a standard intake gasket to seal it. you will also have to remove the two little dowls from the two stud points, off centre at the top, its easy to do with a pair of pliers.
|
|
|
| | Subject | Poster | Date |
|---|
 |
FS: 4AGE Carby Manifold
|
IRA11Y | Thu, 03 October 2002 10:27 |
|
Re: FS: 4AGE Carby Manifold
|
Ribbo | Thu, 03 October 2002 11:30 |
|
Re: FS: 4AGE Carby Manifold
|
Johnny | Thu, 03 October 2002 11:39 |
|
Re: FS: 4AGE Carby Manifold
|
IRA11Y | Fri, 04 October 2002 13:05 |
|
Re: FS: 4AGE Carby Manifold
|
BigWorm | Fri, 04 October 2002 13:40 |
|
Re: FS: 4AGE Carby Manifold
|
IRA11Y | Fri, 04 October 2002 21:41 |
|
Re: FS: 4AGE Carby Manifold
|
Ribbo | Sun, 06 October 2002 03:10 |
|
Re: FS: 4AGE Carby Manifold
|
TRUEN0 | Sun, 06 October 2002 06:50 |
|
Re: FS: 4AGE Carby Manifold
|
kingmick | Sun, 06 October 2002 11:18 |
|
Re: FS: 4AGE Carby Manifold
|
IRA11Y | Sun, 06 October 2002 11:50 |
|
Re: FS: 4AGE Carby Manifold
|
TRUEN0 | Sun, 06 October 2002 13:05 |
|
Re: FS: 4AGE Carby Manifold
|
IRA11Y | Mon, 07 October 2002 01:13 |
|
Re: FS: 4AGE Carby Manifold
|
thetoyman75 | Mon, 07 October 2002 02:32 |
|
Re: FS: 4AGE Carby Manifold
|
Ribbo | Mon, 07 October 2002 07:53 |
|
Re: FS: 4AGE Carby Manifold
|
kingmick | Mon, 07 October 2002 09:08 |
|
Re: FS: 4AGE Carby Manifold
|
IRA11Y | Thu, 17 October 2002 06:05 |
