| Author | Topic |
|---|
Location:
Terrigal
Registered:
May 2002
|
|
Re: Installing Camber tops
|
Thu, 16 September 2004 02:13
 
|
 |
When I put mine in the height did change slightly, can't remember which way though. Depends on the brand/design etc.
As for installing them its really quite easy.
Take the shock out (undo 2 bolts at the bottom, 3 on top). Will need to unbolt brake caliper as well.
Get a spring compressor to compress the springs. Then undo the nut at the top of the shock, take the original top off and put your new camber tops on.
Then re-assemble.
As for toe etc, you'd really want to take it to a wheel alignment place to dial in camber and set the toe. You can do it yourself if you want with tape measure etc.
Cheers
Joel
|
|
|
| | Subject | Poster | Date |
|---|
 |
Installing Camber tops
|
papercut | Thu, 16 September 2004 02:03 |
|
Re: Installing Camber tops
|
TurboRA28 | Thu, 16 September 2004 02:13 |
|
Re: Installing Camber tops
|
blackRA28 | Thu, 16 September 2004 02:53 |
|
Re: Installing Camber tops
|
papercut | Thu, 16 September 2004 03:20 |
|
Re: Installing Camber tops
|
ke382TG | Thu, 16 September 2004 03:46 |
|
Re: Installing Camber tops
|
TurboRA28 | Thu, 16 September 2004 04:17 |
|
Re: Installing Camber tops
|
papercut | Thu, 16 September 2004 05:02 |
|
Re: Installing Camber tops
|
TurboRA28 | Thu, 16 September 2004 05:39 |
|
Re: Installing Camber tops
|
ke382TG | Thu, 16 September 2004 05:45 |
|
Re: Installing Camber tops
|
TurboRA28 | Thu, 16 September 2004 06:11 |
|
Re: Installing Camber tops
|
ke382TG | Thu, 16 September 2004 06:16 |
|
Re: Installing Camber tops
|
TurboRA28 | Thu, 16 September 2004 06:22 |
|
Re: Installing Camber tops
|
papercut | Thu, 16 September 2004 06:50 |
|
Re: Installing Camber tops
|
TurboRA28 | Thu, 16 September 2004 07:04 |
|
Re: Installing Camber tops
|
blackRA28 | Thu, 16 September 2004 11:29 |
|
Re: Installing Camber tops
|
TurboRA28 | Thu, 16 September 2004 23:34 |
|
Re: Installing Camber tops
|
takai | Thu, 16 September 2004 14:46 |
|
Re: Installing Camber tops
|
ae95 | Thu, 16 September 2004 16:20 |
|
Re: Installing Camber tops
|
takai | Thu, 16 September 2004 22:05 |
|
Re: Installing Camber tops
|
datman55 | Fri, 08 October 2004 05:26 |
