| Author | Topic |
|---|
Location:
Hackham South Australia
Registered:
July 2004
|
|
Re: 2T fully recoed & T50 must be sold $300 the lot
|
Wed, 22 September 2004 10:26
|
 |
Fitting the 2T in a KE3# is simple, just put a 3T in my KE30.
Basically use the TA22 engine mounts and the motor will drop in, i recommend bolting the gearbox on first as there is limited room between the motor and fire wall. The gearbox will use the crossmember (i hope thats the right lingo) from the K40 or K50 gearbox and bolt in the holes a bit further back. the tailshaft has to be shortened 30mm.
On the lighter note would u separate the weber? and how much?
|
|
|
| | Subject | Poster | Date |
|---|
 |
2T fully recoed & T50 must be sold $300 the lot
|
Siktoy ra23 | Sun, 22 August 2004 05:27 |
|
Re: 2T fully recoed
|
Siktoy ra23 | Mon, 23 August 2004 13:09 |
|
Re: 2T fully recoed
|
dogeatdog01 | Mon, 23 August 2004 13:34 |
|
Re: 2T fully recoed & T50 for $450
|
Siktoy ra23 | Mon, 13 September 2004 14:16 |
|
Re: 2T fully recoed & T50 for $450
|
MRNOVA | Mon, 13 September 2004 14:28 |
|
Re: 2T fully recoed & T50 for $450
|
Siktoy ra23 | Tue, 14 September 2004 13:46 |
|
Re: 2T fully recoed & T50 for $450
|
nuff | Sun, 19 September 2004 06:46 |
|
Re: 2T fully recoed & T50 for $450
|
Siktoy ra23 | Sun, 19 September 2004 09:58 |
|
Re: 2T fully recoed & T50 must be sold $300 the lot
|
Siktoy ra23 | Tue, 21 September 2004 11:36 |
|
Re: 2T fully recoed & T50 must be sold $300 the lot
|
marc00013390 | Tue, 21 September 2004 11:46 |
|
Re: 2T fully recoed & T50 must be sold $300 the lot
|
Siktoy ra23 | Tue, 21 September 2004 12:18 |
|
Re: 2T fully recoed & T50 must be sold $300 the lot
|
Celica73 | Tue, 21 September 2004 12:18 |
|
Re: 2T fully recoed & T50 must be sold $300 the lot
|
doityourself | Wed, 22 September 2004 10:26 |
