F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » camber adjustment Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
wagonist Forums Junkie Toymods Club Treasurer Location: Sydney Registered: May 2002	Re: camber adjustment Sun, 26 September 2004 23:32 If you can get 3 degrees adjustment out of a camber bolt, then you've got some serious problems. I've got them on my car, & can only get to jsut over one degree negative. And most modern cars with a strut arrangement use them as standard. eg Subaru has been using them on all models since 1989! My previous car, 93 Legacy, needed the camber adjusted back more upright after it was lowered 2" to get -1.5 degrees on the front. If it ever came loose, first thing I'd be doing is suing the company that installed them, or last adjusted them. It is critical part of the suspension, & is meant to be done up with sufficient torque to prevent it coming undone. [Report message to a moderator]

	Subject	Poster	Date
	camber adjustment	b1gb3n	Mon, 20 September 2004 16:18
	Re: camber adjustment	gold28	Wed, 22 September 2004 09:14
	Re: camber adjustment	ae95	Wed, 22 September 2004 09:33
	Re: camber adjustment	b1gb3n	Wed, 22 September 2004 18:35
	Re: camber adjustment	wagonist	Thu, 23 September 2004 10:57
	Re: camber adjustment	b1gb3n	Fri, 24 September 2004 18:27
	Re: camber adjustment	Bourne Boy	Thu, 23 September 2004 12:25
	Re: camber adjustment	wagonist	Sun, 26 September 2004 23:32
	Re: camber adjustment	Norbie	Fri, 24 September 2004 00:24
	Re: camber adjustment	allencr	Fri, 24 September 2004 20:09

Previous Topic:	Removing control arm
Next Topic:	3SGTE Knock sensor?!

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.