F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » clutch allignment Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
fade-e Forums Junkie Location: Sydney Registered: June 2004	Re: clutch allignment Mon, 27 September 2004 05:23 i use my finger as an alignment tool iv never really seen the need for the alignment tool cause with a bit of jiggle and wiggle the box goes in. if you read the instructions with the clutch it mentions to tighten the bolts until the pressure plate is level. basically on the side of the pressure plate where the bolt goes you will see a metal strip on an angle. when you bolt the plate down the metal strip straightens and flatens out and when it is flat then stop tightening [Report message to a moderator]

	Subject	Poster	Date
	clutch allignment	ta2272	Mon, 27 September 2004 04:49
	Re: clutch allignment	Rallystanza	Mon, 27 September 2004 04:58
	Re: clutch allignment	ta2272	Mon, 27 September 2004 05:04
	Re: clutch allignment	ta2272	Mon, 27 September 2004 05:09
	Re: clutch allignment	Ben Wilson	Mon, 27 September 2004 05:02
	Re: clutch allignment	Rallystanza	Mon, 27 September 2004 05:21
	Re: clutch allignment	fade-e	Mon, 27 September 2004 05:23
	Re: clutch allignment	7mgte83	Mon, 27 September 2004 06:01
	Re: clutch allignment	EvilJack	Mon, 27 September 2004 06:24
	Re: clutch allignment	EVOSTi	Mon, 27 September 2004 07:47
	Re: clutch allignment	ta2272	Mon, 27 September 2004 08:45
	Re: clutch allignment	EVOSTi	Mon, 27 September 2004 08:52

Previous Topic:	Bluewire News
Next Topic:	Vent Holes in T50

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.