F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » Trying to operate a starter motor off the engien (1G). Can't get it to stay running... Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
MacroP Regular Location: Binningup WA Registered: April 2004	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running... Wed, 29 September 2004 12:15 Stefan wrote on Wed, 29 September 2004 16:37 Measured it, and there's no resistance at all between that bolt and the case... The resistance of the solenoid coil is very low. Under 1 Ohm. Just measured my starter coil off a 5M-GE which I've spent all day pulling out. My meter(precision bench type) shows a value 0.32 Ohms. When testing a starter motor you shouldn't really pay attention to a continuity test beeper. The motor windings are very low resistance and appear as a dead short to most multlimeters. You should have very low resistance to earth/ground on both the stud that connects the coil to the motor as well the coil terminal it self. The stud that connects to battery normally should be open circuit relative to ground. Most common faults I've had over the years with these Aisin starter's is either the contacts wear out(replaceable)or the coil winding fails, which is not an easy fix. [Report message to a moderator]

	Subject	Poster	Date
	Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Stefan	Sat, 25 September 2004 07:02
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Cool1	Sat, 25 September 2004 07:09
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	oldcorollas	Sat, 25 September 2004 07:12
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Stefan	Sat, 25 September 2004 07:20
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	oldcorollas	Sat, 25 September 2004 07:35
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Stefan	Sat, 25 September 2004 07:40
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Stefan	Wed, 29 September 2004 06:33
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	oldcorollas	Wed, 29 September 2004 06:47
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	oldcorollas	Wed, 29 September 2004 06:49
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Stefan	Wed, 29 September 2004 07:01
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Stefan	Wed, 29 September 2004 08:37
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	MacroP	Wed, 29 September 2004 12:15
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Stefan	Wed, 29 September 2004 23:41
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Rusty1	Thu, 30 September 2004 13:17
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Stefan	Fri, 01 October 2004 02:09
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Dabbid	Fri, 01 October 2004 09:03
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	73ke25	Fri, 01 October 2004 10:02
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Dabbid	Fri, 01 October 2004 13:11
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	73ke25	Fri, 01 October 2004 13:32
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Dabbid	Fri, 01 October 2004 21:16
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Stefan	Fri, 01 October 2004 13:48
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	Anthony Kellam	Sat, 02 October 2004 01:00
	Re: Trying to operate a starter motor off the engien (1G). Can't get it to stay running...	allencr	Sat, 02 October 2004 23:10

Previous Topic:	4age quad throttle on 16V
Next Topic:	3s-ge reving too high

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.