F.A.Q.    Register    Login    Home Members    Search

Toymods » Tech & Conversions » 3s-ge reving too high Show: Today's Posts  :: Show Polls  Email to friend

Author	Topic
dingaling Forums Junkie Location: tas Registered: June 2002	Re: 3s-ge reving too high Sat, 02 October 2004 15:00 thanx for clearing that up for me TA22-3SGTE ke70_strolla: You should try this. After your engine has warmed up and settled down to it's 1000rpm idle speed, you should adjust the idle speed screw. it's on the throttle body right next to the TPS. It's usually hidden under a plastic cap. See if it lowers your idle, and in effect it might also shift your warm up idle down abit too. If the screw does not help then it'd be a good idea to remember it's original setting and put it back to what it was and look else where for the idle problem. could be something simple like a loose clamp or a crack in that big pipe connected to your AFM and throttle body letting extra air in. My friends celica with a gen1 3sge is also having idle issues, his idles too low (500rpm) and starts fluctuation the idle (500rpm-1500rpm), also his engine won't idle up when under electrical load, i suspect it's his idle speed controller. [Report message to a moderator]

	Subject	Poster	Date
	3s-ge reving too high	ke70_strolla	Thu, 30 September 2004 12:49
	Re: 3s-ge reving too high	ae95	Thu, 30 September 2004 13:31
	Re: 3s-ge reving too high	hemi twofifteen turbo	Fri, 01 October 2004 08:05
	Re: 3s-ge reving too high	ae95	Fri, 01 October 2004 08:16
	Re: 3s-ge reving too high	RWDboy	Sat, 02 October 2004 03:10
	Re: 3s-ge reving too high	dingaling	Sat, 02 October 2004 07:31
	Re: 3s-ge reving too high	ke70_strolla	Sat, 02 October 2004 11:49
	Re: 3s-ge reving too high	dingaling	Sat, 02 October 2004 12:03
	Re: 3s-ge reving too high	TA22-3SGTE	Sat, 02 October 2004 12:09
	Re: 3s-ge reving too high	ke70_strolla	Sat, 02 October 2004 12:47
	Re: 3s-ge reving too high	dingaling	Sat, 02 October 2004 15:00

Previous Topic:	Trying to operate a starter motor off the engien (1G). Can't get it to stay running...
Next Topic:	R154 Heavy Duty Bearing Coverplate

Powered by: FUDforum 2.3.8
Copyright ©2001-2003 Advanced Internet Designs Inc.