| Author | Topic |
|---|
Location:
Brisbane
Registered:
May 2002
|
|
Re: will this work if so wat do i need to do
|
Sun, 03 October 2004 12:48
 
|
 |
Many people who modify 3T-GTE's only use one set of plugs. Apparently the original idea behind the twin-spark setup was to help prevent detonation. An intercooler does a much better job of that though!
As above, the 3T-GTE inlet manifold will not bolt up to the 2T-G cylinder head, but you'll find the 2T-GEU manifold is much more convenient for intercooler piping since it has a front-facing throttle body.
|
|
|
| | Subject | Poster | Date |
|---|
 |
will this work if so wat do i need to do
|
lilcrash | Sun, 03 October 2004 08:27 |
|
Re: will this work if so wat do i need to do
|
Norbie | Sun, 03 October 2004 08:53 |
|
Re: will this work if so wat do i need to do
|
river | Sun, 03 October 2004 11:15 |
|
Re: will this work if so wat do i need to do
|
SeptemberSquallIndustries | Sun, 03 October 2004 11:22 |
|
Re: will this work if so wat do i need to do
|
lilcrash | Sun, 03 October 2004 10:51 |
|
Re: will this work if so wat do i need to do
|
T APLUS 22 | Sun, 03 October 2004 11:48 |
|
Re: will this work if so wat do i need to do
|
Norbie | Sun, 03 October 2004 12:48 |
|
Re: will this work if so wat do i need to do
|
mrshin | Sun, 03 October 2004 13:05 |
|
Re: will this work if so wat do i need to do
|
SeptemberSquallIndustries | Sun, 03 October 2004 13:07 |
|
Re: will this work if so wat do i need to do
|
Norbie | Mon, 04 October 2004 07:52 |
