| Author | Topic |
|---|
Location:
South Eastern Subs
Registered:
March 2004
|
|
Re: Cam cover polishing in Bris
|
Tue, 05 October 2004 09:40
|
 |
|
I just polished mein along with all the rest of the stuff..its not that hard if u got a good bench grinder and use some elbow grease. The cam cover is not as rough cast aluminium as the manifold ..so it comes up. You need a sisel buffing wheel which is a rough wheel to get the aluminium smooth. You also need a brown chalk for the sisel wheel and white chalk for finishing on a soft wheel. You can buy all this from Bunnings. Then just get stuck into it...
|
|
|
| | Subject | Poster | Date |
|---|
 |
Cam cover polishing in Bris
|
Gleno28 | Tue, 05 October 2004 08:48 |
|
Re: Cam cover polishing in Bris
|
BLK1GGTE | Tue, 05 October 2004 09:40 |
